メインコンテンツにスキップ

はじめに

This guide provides step-by-step instructions for removing and replacing the camera lens. There are two tools required and no safety precautions needed.

パーツ

パーツは指定されていません。

  1. Turn off camera by firmly pressing the power button that is located on the top of the camera.
    • Turn off camera by firmly pressing the power button that is located on the top of the camera.

  2. Position camera with the bottom facing up.
    • Position camera with the bottom facing up.

  3. With your finger, slide the battery cover in the direction of the open arrow.
    • With your finger, slide the battery cover in the direction of the open arrow.

  4. Lift the battery cover up gently.
    • Lift the battery cover up gently.

  5. Gently push the battery down until a click is heard. Battery should release and be lifted out of slot. Gently push the battery down until a click is heard. Battery should release and be lifted out of slot.
    • Gently push the battery down until a click is heard. Battery should release and be lifted out of slot.

  6. Use a J00 screwdriver to remove the five exterior screws. Use a J00 screwdriver to remove the five exterior screws.
    • Use a J00 screwdriver to remove the five exterior screws.

  7. Pull the outer case off using the plastic opening tool.
    • Pull the outer case off using the plastic opening tool.

  8. Remove the LCD display by unplugging the connector Take apart the LCD display from the back case
    • Remove the LCD display by unplugging the connector

    • Take apart the LCD display from the back case

  9. Peel off the yellow film. Peel off the black tape holding the wires.
    • Peel off the yellow film.

    • Peel off the black tape holding the wires.

  10. Unplug the connector by lifting the little lock holding it in place.
    • Unplug the connector by lifting the little lock holding it in place.

  11. Use a J00 screwdriver to remove two screws located on the far right, near to the main button. Use a J00 screwdriver to remove two screws located on the far right, near to the main button.
    • Use a J00 screwdriver to remove two screws located on the far right, near to the main button.

  12. Use a J00 screwdriver to remove 6 screws  located at the center of the back panel. Gently pull out the lens using you finger tips or pincers. Gently pull out the lens using you finger tips or pincers.
    • Use a J00 screwdriver to remove 6 screws located at the center of the back panel.

    • Gently pull out the lens using you finger tips or pincers.

終わりに

To reassemble your device, follow these instructions in reverse order.

Sarah Berry

メンバー登録日: 2017年03月21日

301 ポイント

3のガイドは作成済み

チーム

UMass Dartmouth, Team S9-G4, Martin Spring 2017 UMass Dartmouth, Team S9-G4, Martin Spring 2017人のメンバー

UMASSD-MARTIN-S17S9G4

4 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 222