はじめに

The lens cover protects the lens of the camera from being scratched or damaged while not in use. If the cover breaks or cracks and a replacement needs to be done, you can follow the steps in the following guide.

  1. Remove lens cover from the camera by squeezing the protruding button on each side of the cover and pulling.
    • Remove lens cover from the camera by squeezing the protruding button on each side of the cover and pulling.

    コメントを追加する

  2. Pull the lens cover string toward the ground so that the loop underneath the metal slab is on top of the cover string.
    • Pull the lens cover string toward the ground so that the loop underneath the metal slab is on top of the cover string.

    • Push up so that the string starts to come out of the top of the loop.

    • Grab the string from above the loop and pull.

    コメントを追加する

    • Feed the string on top into the metal slab while pulling the loop toward you until the plastic piece stops you from pulling any further.

    コメントを追加する

    • Separate the two pieces of the loop and pull the lens cover up in between them.

    コメントを追加する

    • Pull the lens cover and the sting will come out of the metal slab.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Kirsten Price

メンバー登録日: 2014年09月17日

343 ポイント

6のガイドは作成済み

チーム

University of Kentucky Louisville, Team 1-4, Mathis Fall 2014 University of Kentucky Louisville, Team 1-4, Mathis Fall 2014人のメンバー

LOUISVILLE-MATHIS-F14S1G4

4 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 2

今までの合計 346