メインコンテンツにスキップ

Kodak EasyShare Z1015 IS Back Cover Replacement

必要な工具と部品

  1. Kodak EasyShare Z1015 IS Back Cover Replacement, Battery: 手順 1、 2の画像 1 Kodak EasyShare Z1015 IS Back Cover Replacement, Battery: 手順 1、 2の画像 2
    • Begin by sliding the switch towards the open symbol. Release your finger from the switch and the battery case will pop open.

  2. Kodak EasyShare Z1015 IS Back Cover Replacement: 手順 2、 1の画像 1
    • Next, press down on the red lever which holds the battery in place.

  3. Kodak EasyShare Z1015 IS Back Cover Replacement: 手順 3、 2の画像 1 Kodak EasyShare Z1015 IS Back Cover Replacement: 手順 3、 2の画像 2
    • Once the battery has popped out of the compartment, simply pull it out of the camera.

  4. Kodak EasyShare Z1015 IS Back Cover Replacement, Back Cover: 手順 4、 3の画像 1 Kodak EasyShare Z1015 IS Back Cover Replacement, Back Cover: 手順 4、 3の画像 2 Kodak EasyShare Z1015 IS Back Cover Replacement, Back Cover: 手順 4、 3の画像 3
    • Make sure that the lens cover is on the Kodak EasyShare whenever working with one of these guides.

    • Also, make sure to keep track of the screws you remove throughout these step by step guides. Losing a screw could inhibit the ability to reassemble the camera.

    • Begin by removing the first screw located on the back of the camera.

  5. Kodak EasyShare Z1015 IS Back Cover Replacement: 手順 5、 2の画像 1 Kodak EasyShare Z1015 IS Back Cover Replacement: 手順 5、 2の画像 2
    • Next, remove the two screws located on the right side of the camera.

  6. Kodak EasyShare Z1015 IS Back Cover Replacement: 手順 6、 2の画像 1 Kodak EasyShare Z1015 IS Back Cover Replacement: 手順 6、 2の画像 2
    • After removing the screws located on the right side, remove the six screws located on the bottom of the camera.

  7. Kodak EasyShare Z1015 IS Back Cover Replacement: 手順 7、 2の画像 1 Kodak EasyShare Z1015 IS Back Cover Replacement: 手順 7、 2の画像 2
    • Lastly, remove the two screws located on the left side of the camera.

  8. Kodak EasyShare Z1015 IS Back Cover Replacement: 手順 8、 3の画像 1 Kodak EasyShare Z1015 IS Back Cover Replacement: 手順 8、 3の画像 2 Kodak EasyShare Z1015 IS Back Cover Replacement: 手順 8、 3の画像 3
    • Once all eleven screws have been removed, use Plastic Opening Tools to take off the back cover.

    • Insert the plastic opening tool and apply leverage on each side of the camera. The recommended spots to apply leverage are shown in these pictures.

  9. Kodak EasyShare Z1015 IS Back Cover Replacement: 手順 9、 3の画像 1 Kodak EasyShare Z1015 IS Back Cover Replacement: 手順 9、 3の画像 2 Kodak EasyShare Z1015 IS Back Cover Replacement: 手順 9、 3の画像 3
    • Apply pressure on the left and right side of the camera and pull the back cover away from the device.

    • Once the back cover has been successfully removed, you should have a total of eleven screws as well as the bottom cover separated from the camera.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

6人の作成者と共同で作成されました。

katie newman

メンバー登録日: 10/28/10

30 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 5-16, Maness Fall 2010 Cal Poly, Team 5-16, Maness Fall 2010人のメンバー

CPSU-MANESS-F10S5G16

4 メンバー

11のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 6

今までの合計 1,389