修理を始めるには

修理する権利

パーツ＆ツール

KitchenAid Classic Mixer K45SSWH Gasket Replacement

作成者： Joey Gavin (そして 5 人のその他投稿者)
  • コメント: 8
  • お気に入り: 0
  • 完了: 3

難易度

普通

手順

10

所要時間

20 - 25 分

セクション

2

フラグ

0

  1. Using a spudger, gently pry off the aluminum drip ring. Using a spudger, gently pry off the aluminum drip ring.

    • Using a spudger, gently pry off the aluminum drip ring.

    編集

  2. Using a 4 mm pin punch and hammer, hammer the pin until it is dislodged from the planetary gear cover.

    • Using a 4 mm pin punch and hammer, hammer the pin until it is dislodged from the planetary gear cover.

    編集

  3. Using a spudger, pry the planetary gear cover from the mixer shaft. Using a spudger, pry the planetary gear cover from the mixer shaft.

    • Using a spudger, pry the planetary gear cover from the mixer shaft.

    編集

  4. Using a flathead screwdriver, remove the five 28 mm front motor housing screws.

    • Using a flathead screwdriver, remove the five 28 mm front motor housing screws.

    • Using the same flathead screwdriver, remove the two 28 mm locking screws.

    • One of the locking screws contains a safety locking mechanism. Do not interchange these screws with the front motor housing screws.

    編集

  5. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

  6. Turn your device around. Using the same flathead screwdriver, remove the two 28 mm rear locking screws.

    • Turn your device around. Using the same flathead screwdriver, remove the two 28 mm rear locking screws.

    • One of the rear motor housing screws contains a safety locking mechanism. Do not interchange these screws with the front motor housing screws.

    編集

  7. Using a Phillips #2 screwdriver, remove the 10 mm screw from top of back cover. The rear cover is now completely free from the mixer.

    • Using a Phillips #2 screwdriver, remove the 10 mm screw from top of back cover.

    • The rear cover is now completely free from the mixer.

    編集

  8. Carefully pull the power cord from the notch in back of the mixer. The motor housing cover is now completely free from the base of the mixer.

    • Carefully pull the power cord from the notch in back of the mixer.

    • The motor housing cover is now completely free from the base of the mixer.

    編集

  9. Lift the motor housing cover from the mixer base.

    • Lift the motor housing cover from the mixer base.

    • Be sure to place the cover upside-down to prevent grease from leaking out.

    編集

  10. Use a butter knife or putty knife to remove grease from around the gasket. Place grease in motor housing cover.

    • Use a butter knife or putty knife to remove grease from around the gasket.

    • Place grease in motor housing cover.

    編集

  11. Lift the gasket up with your hands or a spuger and remove it.

    • Lift the gasket up with your hands or a spuger and remove it.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

作成者

5他の投稿者と一緒に

Joey Gavin

メンバー登録日: 2014年10月13日

173 ポイント

1ガイドが承認済み

バッジ: 6

+3 個以上のバッジ

チーム

Cal Poly, Team 14-28, Maness Fall 2014 Cal Poly, Team 14-28, Maness Fall 2014人のメンバー

CPSU-MANESS-F14S14G28

4 メンバー

12のガイドは作成済み

コメント1件

コメントを追加

I got all the way to the last step of replacing the pin when i notice the mixer seemed to lock there in place and not move. What did i do wrong?

Dawn dawn6463@yahoo.com

Dawn Bennett - 返信

コメントを追加

統計データを表示:

過去 24時間: 3

過去 7 日: 17

過去 30 日: 59

今までの合計 3,145