修理を始めるには コミュニティ ストア

Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly

はじめに

This is a guide on how to disassemble and remove the heating element from the Kitchen Smith 1.7L Electric Kettle KE01102-UL. It is an easy process and should require less than 10 minutes to complete. As with any electrical device, make sure it is unplugged as you work on it, and avoid water contact with any of the internal parts.

必要な工具と部品

  1. Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly, Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 1、 2の画像 1 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly, Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 1、 2の画像 2

    • At the bottom of the kettle pot, remove two 10 mm screws with a Phillips #2 screwdriver.

    編集

  2. Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 2、 3の画像 1 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 2、 3の画像 2 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 2、 3の画像 3

    • Open the lid of the kettle

    • Remove two 12 mm screws at the top of the handle with a Phillips #2 screwdriver.

    編集

  3. Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 3、 2の画像 1 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 3、 2の画像 2

    • The exterior of the plastic handle and lid can now be removed from the kettle to expose the electric components.

    • The plastic cover may need a little wiggling to pop off.

    編集

  5. Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 4、 3の画像 1 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 4、 3の画像 2 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 4、 3の画像 3

    • Turn the kettle over to the back of the handle.

    • Remove three 10 mm screws connecting the switch circuit to the heating element with a Phillips #2 screwdriver.

    • The heating element should disconnect, allowing you to remove it.

    編集

  6. Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 5、 2の画像 1 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 5、 2の画像 2

    • The pronged power element, removed in Step 4, will have a dry-heating safety feature on the opposite side.

    • This switch turns off the kettle once steam is detected, indicating the water is boiling.

    • This is the boil dry protection switch.

    編集

  7. Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 6、 2の画像 1 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 6、 2の画像 2

    • The inner heating element can now be removed after the completion of Step 4.

    編集

  8. Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 7、 3の画像 1 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 7、 3の画像 2 Kitchen Smith 1.7L Electric Kettle KE01102-UL Disassembly: 手順 7、 3の画像 3

    • Looking at the bottom of the base, remove two 12 mm screws from the base with a Triangle #2 screwdriver.

    • You are now able to take the black plastic cover off and remove the cord.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

添付文書

作成者

2人の作成者と共同で作成されました。

Amanda Yan

メンバー登録日: 09/14/22

195 ポイント

1ガイドが承認済み

バッジ: 3

チーム

Tufts University School of Engineering, Team 1-2, Bell Fall 2022 Tufts University School of Engineering, Team 1-2, Bell Fall 2022人のメンバー

TUFTS-BELL-F22S1G2

2 メンバー

2のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 9

過去 30 日: 26

今までの合計 388