はじめに

The case of your Kindle Paperwhite gets a lot of abuse from everyday life. Replace a cracked or a scratched case to restore that fresh out-of-the-box feeling.

Using a spudger or plastic opening tool, gently pry the bezel from the screen. It is easier to start in the corners and work your way around the bezel. Do not insert the spudger too far under the bezel; it could easily damage the screen.
  • Using a spudger or plastic opening tool, gently pry the bezel from the screen. It is easier to start in the corners and work your way around the bezel.

  • Do not insert the spudger too far under the bezel; it could easily damage the screen.

I found it easier to start this step off with one of the Opening Picks found in the iOpener pack.

NathanF - 返信

Remove the eleven 3.0 mm Phillips screws surrounding the midframe. At the top of the display, a strip of black tape covers one screw. At the top of the display, a strip of black tape covers one screw.
  • Remove the eleven 3.0 mm Phillips screws surrounding the midframe.

  • At the top of the display, a strip of black tape covers one screw.

On 3G version you will not have the top middle screw.

BJones - 返信

Lift the midframe out of the case.
  • Lift the midframe out of the case.

  • If the midframe is stuck, slide it to the left first, and then lift it out.

There are clips in the bottom of the case helping hold the midframe in. Lift the top of the midframe up enough to clear the black back piece and then slide up and out.

BJones - 返信

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Anthony Nahal

メンバー登録日: 2013年01月25日

42 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team 3-33, Amido Winter 2013 Cal Poly, Team 3-33, Amido Winter 2013人のメンバー

CPSU-AMIDO-W13S3G33

4 メンバー

10のガイドは作成済み

コメント1件

Thanks for the guide but do you know anywhere can we get a replacement case?

jerryw - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 31

今までの合計 5,098