メインコンテンツにスキップ

Keurig K40 Top Water Pump Replacement

必要な工具と部品

  1. Keurig K40 Top Water Pump Replacement, Top Water Pump: 手順 1、 1の画像 1
    • Begin by removing the top cover from the device.

    • Remove the cover by gently rocking it back and forth with an emphasis on lowering the left side underneath an internal peg.

  2. Keurig K40 Top Water Pump Replacement: 手順 2、 1の画像 1
    • Unscrew both 1.5mm screws located on the water pump.

  3. Keurig K40 Top Water Pump Replacement: 手順 3、 2の画像 1 Keurig K40 Top Water Pump Replacement: 手順 3、 2の画像 2
    • Keeping one hand firmly placed on the device, tug upwards on the water pump until it is separated from the device.

    • The water pump and pipe should now be loose and easy to move as shown.

  4. Keurig K40 Top Water Pump Replacement: 手順 4、 2の画像 1 Keurig K40 Top Water Pump Replacement: 手順 4、 2の画像 2
    • Pull on the point where the pipe meets the water pump.

    • The pipe will come loose and the water filter will be free and ready to be replaced.

終わりに

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Andrew Bornemann

メンバー登録日: 02/08/16

476 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 6-1, Eyestone Spring 2016 USF Tampa, Team 6-1, Eyestone Spring 2016人のメンバー

USFT-EYESTONE-S16S6G1

3 メンバー

5のガイドは作成済み

4 件のコメント

I NEED ONE OF THESE! Where can I find one????

G Steve - 返信

This is a check valve, not the water pump.

Rick Koen - 返信

Please rename this article. The item is not a water pump.

tvyse46 - 返信

I viewed this to replace the pump. But after the checkvalve was replaced through these instructions my K40 works like new. Thank you.

Glenn Stanley - 返信

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 17

過去 30 日: 53

今までの合計 9,424