メインコンテンツにスキップ

Keurig B70 Platinum Base Replacement

必要な工具と部品

  1. Keurig B70 Platinum Base Replacement, Base: 手順 1、 2の画像 1 Keurig B70 Platinum Base Replacement, Base: 手順 1、 2の画像 2
    • Turn off and unplug the Keurig before starting.

    • Turn the Keurig upside down so the metal base is exposed.

    • Remove the five 12.0 mm screws.

  2. Keurig B70 Platinum Base Replacement: 手順 2、 2の画像 1 Keurig B70 Platinum Base Replacement: 手順 2、 2の画像 2
    • Lift the metal plate off the Keurig and hang it over the side of the device.

    • Be careful! The metal plate is sharp!

    • There are wires connected to the metal plate. Make sure the wires are not in the way of the internal components.

  3. Keurig B70 Platinum Base Replacement: 手順 3、 3の画像 1 Keurig B70 Platinum Base Replacement: 手順 3、 3の画像 2 Keurig B70 Platinum Base Replacement: 手順 3、 3の画像 3
    • Remove the three 11.0 mm screws located on the upper left side of the base from within the tub-looking area.

    • Pull out the red and white wires and put it off to the side of the Keurig.

  4. Keurig B70 Platinum Base Replacement: 手順 4、 3の画像 1 Keurig B70 Platinum Base Replacement: 手順 4、 3の画像 2 Keurig B70 Platinum Base Replacement: 手順 4、 3の画像 3
    • Pull out the water collector by gripping it tightly and lifting upwards.

  5. Keurig B70 Platinum Base Replacement: 手順 5、 3の画像 1 Keurig B70 Platinum Base Replacement: 手順 5、 3の画像 2 Keurig B70 Platinum Base Replacement: 手順 5、 3の画像 3
    • Lift the tube, connected to the tank, off the black plastic hook and leave it off to the side of the hook.

  6. Keurig B70 Platinum Base Replacement: 手順 6、 3の画像 1 Keurig B70 Platinum Base Replacement: 手順 6、 3の画像 2 Keurig B70 Platinum Base Replacement: 手順 6、 3の画像 3
    • Pull the power cord out from the plastic holder located near the water tank.

    • This step requires a bit of force so don't be afraid to pull harder!

  7. Keurig B70 Platinum Base Replacement: 手順 7、 2の画像 1 Keurig B70 Platinum Base Replacement: 手順 7、 2の画像 2
    • Remove the six 13.0 mm screws.

  8. Keurig B70 Platinum Base Replacement: 手順 8、 3の画像 1 Keurig B70 Platinum Base Replacement: 手順 8、 3の画像 2 Keurig B70 Platinum Base Replacement: 手順 8、 3の画像 3
    • Lift the metal base and hover it over the opening of the black plastic base.

    • Carefully raise the plastic base over the metal base until it is removed.

    • Make sure to pull the power cord through the base as well!

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Steven Tran

メンバー登録日: 10/14/18

329 ポイント

2のガイドは作成済み

チーム

UW Tacoma, Team S1-G6, Rose Fall 2018 UW Tacoma, Team S1-G6, Rose Fall 2018人のメンバー

UWT-ROSE-F18S1G6

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 5

今までの合計 543