メインコンテンツにスキップ

Kenwood KDC-BT362U Metal Case Separation

必要な工具と部品

  1. Kenwood KDC-BT362U Metal Case Separation, Front Panel: 手順 1、 1の画像 1
    • Locate the face-plate eject button.

  2. Kenwood KDC-BT362U Metal Case Separation: 手順 2、 2の画像 1 Kenwood KDC-BT362U Metal Case Separation: 手順 2、 2の画像 2
    • Press the eject button with your forefinger.

    • Remove the face-plate.

  3. Kenwood KDC-BT362U Metal Case Separation: 手順 3、 2の画像 1 Kenwood KDC-BT362U Metal Case Separation: 手順 3、 2の画像 2
    • Starting on the top side, pop the front panel frame out.

    • Remove the face-plate frame.

  4. Kenwood KDC-BT362U Metal Case Separation: 手順 4、 2の画像 1 Kenwood KDC-BT362U Metal Case Separation: 手順 4、 2の画像 2
    • Use the plastic opening tool to pry open the tabs.

    • Repeat on the opposite side.

  5. Kenwood KDC-BT362U Metal Case Separation: 手順 5、 1の画像 1
    • Remove the front panel.

  6. Kenwood KDC-BT362U Metal Case Separation, Metal Case: 手順 6、 3の画像 1 Kenwood KDC-BT362U Metal Case Separation, Metal Case: 手順 6、 3の画像 2 Kenwood KDC-BT362U Metal Case Separation, Metal Case: 手順 6、 3の画像 3
    • Use the Phillips #0 Screwdriver to remove the screws off of the metal case.

  7. Kenwood KDC-BT362U Metal Case Separation: 手順 7、 3の画像 1 Kenwood KDC-BT362U Metal Case Separation: 手順 7、 3の画像 2 Kenwood KDC-BT362U Metal Case Separation: 手順 7、 3の画像 3
    • Carefully separate the top and bottom halves of the metal case apart.

    • Do not separate the metal case halves completely.

    • Carefully pull the DVD-Drive ribbon cable from the motherboard.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

1人の作成者と共同作成されました。

Pablo Cabrera

メンバー登録日: 10/04/16

201 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 2-5, Cagle Fall 2016 USF Tampa, Team 2-5, Cagle Fall 2016人のメンバー

USFT-CAGLE-F16S2G5

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 7

今までの合計 319