メインコンテンツにスキップ

Kawasaki Ninja 300 Seat Replacement

必要な工具と部品

  1. Kawasaki Ninja 300 Seat Replacement, Seat: 手順 1、 3の画像 1 Kawasaki Ninja 300 Seat Replacement, Seat: 手順 1、 3の画像 2 Kawasaki Ninja 300 Seat Replacement, Seat: 手順 1、 3の画像 3
    • Locate the bolt holding the side seat cover in place and remove it using a 4mm hex key.

    • Make sure to also remove the bolt's washer.

  2. Kawasaki Ninja 300 Seat Replacement: 手順 2、 3の画像 1 Kawasaki Ninja 300 Seat Replacement: 手順 2、 3の画像 2 Kawasaki Ninja 300 Seat Replacement: 手順 2、 3の画像 3
    • If you're working in cold conditions, be careful not to break the side seat cover.

    • Reach under the side seat cover and firmly pull it out to unseat it from its rubber clips. There is one at the rear of the cover and two at the front.

  3. Kawasaki Ninja 300 Seat Replacement: 手順 3、 3の画像 1 Kawasaki Ninja 300 Seat Replacement: 手順 3、 3の画像 2 Kawasaki Ninja 300 Seat Replacement: 手順 3、 3の画像 3
    • Locate the seat bolt and remove it using a 5mm hex key.

    • It's best to use the longer end of the hex key, as the shorter end won't quite fit.

    • Make sure to also remove the bolt's washer.

    • Repeat these steps on the other side of the motorcycle before continuing on to the next step.

  4. Kawasaki Ninja 300 Seat Replacement: 手順 4、 3の画像 1 Kawasaki Ninja 300 Seat Replacement: 手順 4、 3の画像 2 Kawasaki Ninja 300 Seat Replacement: 手順 4、 3の画像 3
    • Grab the front section of the seat and slightly lift it up and back to remove it.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Craig Lloyd

メンバー登録日: 02/10/16

35,237 ポイント

82のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 9

過去 7 日: 21

過去 30 日: 104

今までの合計 12,081