メインコンテンツにスキップ

はじめに

Use this guide to replace the tweeter and driver of your KLH bookshelf speaker.

  1. Remove the front speaker mesh to expose the speakers. The mesh will lift off without the use of tools.
    • Remove the front speaker mesh to expose the speakers. The mesh will lift off without the use of tools.

  2. Once the mesh is removed, begin to remove the screws securing the small upper speaker/tweeter with a #1 Philips head screwdriver.
    • Once the mesh is removed, begin to remove the screws securing the small upper speaker/tweeter with a #1 Philips head screwdriver.

  3. Once the screws have been removed, begin to remove the small upper speaker. To do this, pry it out with either a flat blade, screwdriver or Spudger. Take care to not damage the speaker’s wooden body, whilst prying the speaker out.
    • Once the screws have been removed, begin to remove the small upper speaker. To do this, pry it out with either a flat blade, screwdriver or Spudger.

    • Take care to not damage the speaker’s wooden body, whilst prying the speaker out.

  4. After you have removed the speaker, disconnect the Red and Brown wires, from the speaker.
    • After you have removed the speaker, disconnect the Red and Brown wires, from the speaker.

    • You might require needlenose pliers to do this.

  5. Remove the speaker from its plastic bezel using a #1 Philips head screwdriver. Remove the speaker from its plastic bezel using a #1 Philips head screwdriver. Remove the speaker from its plastic bezel using a #1 Philips head screwdriver.
    • Remove the speaker from its plastic bezel using a #1 Philips head screwdriver.

  6. For the larger bottom speaker, the same steps will be taken to remove the speaker.
    • For the larger bottom speaker, the same steps will be taken to remove the speaker.

    • Remove the four screws securing the speaker.

  7. Once the screws are removed, remove the speaker by either prying up from the top or pushing the speaker through pushing on the bottom of the speaker. Once the screws are removed, remove the speaker by either prying up from the top or pushing the speaker through pushing on the bottom of the speaker.
    • Once the screws are removed, remove the speaker by either prying up from the top or pushing the speaker through pushing on the bottom of the speaker.

  8. Once the speaker is removed, remove the Black and White wires. Once the speaker is removed, remove the Black and White wires.
    • Once the speaker is removed, remove the Black and White wires.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Mark Lee Hensley

メンバー登録日: 2016年06月01日

110 ポイント

1ガイドが承認済み

チーム

Central Coast New Tech High, Team 7-3, Rushing Spring 2016 Central Coast New Tech High, Team 7-3, Rushing Spring 2016人のメンバー

CCNTH-RUSHING-S16S7G3

2 メンバー

1のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 21

今までの合計 919