修理を始めるには コミュニティ ストア

Jensen JTA-230 Speaker Replacement

はじめに

A speaker in an acoustic device that plays music out loud held connected inside a device. It is usually built in-place so disassembly will be involved.

必要な工具と部品

    • First, open the dust cover and grab it by the hinges and pull up until it slides out.

    • Then, using a screwdriver unscrew the 3 screws on each side and remove the top layer of the record player. The top should pop out.

    編集

  2. Jensen JTA-230 Speaker Replacement: 手順 2、 2の画像 1 Jensen JTA-230 Speaker Replacement: 手順 2、 2の画像 2

    • You should see the speakers(one on both side). From here, you want to unscrew the three screws holding them in place, using the same head as the previous step.

    編集

  4. Jensen JTA-230 Speaker Replacement: 手順 3、 1の画像 1

    • Carefully remove the speakers from the device, being careful not to harm any components of the speaker.

    編集

  5. Jensen JTA-230 Speaker Replacement: 手順 4、 1の画像 1

    • Once the speaker is out of the device, you should use a soldering iron to take off the wires on the current broken speaker, and put them to the new speaker using a soldering iron.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

John Roche

メンバー登録日: 03/02/16

175 ポイント

1ガイドが承認済み

バッジ: 6

+3 個以上のバッジ

チーム

UMass Dartmouth, Team 8-8, Botvin Spring 2016 UMass Dartmouth, Team 8-8, Botvin Spring 2016人のメンバー

UMASSD-BOTVIN-S16S8G8

3 メンバー

5のガイドは作成済み

コメント 1 件

What type of speakers do I need to buy?

Isaac Bott - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 547