メインコンテンツにスキップ

Jeans 2-Hole Button Replacement

必要な工具と部品

  1. Jeans 2-Hole Button Replacement, 2-Hole Button: 手順 1、 1の画像 1
    • Find a thread color that matches the fabric you are sewing the button on to.

  2. Jeans 2-Hole Button Replacement: 手順 2、 1の画像 1
    • Loop the thread through the eye of the needle.

    • Tie a small knot around the eye of the needle with the thread.

    • Make sure the knot is tight!

  3. Jeans 2-Hole Button Replacement: 手順 3、 1の画像 1
    • Thread the needle through the fabric from the inside out.

    • Tie a knot at the end of the thread after pulling most of it through the fabric.

  4. Jeans 2-Hole Button Replacement: 手順 4、 3の画像 1 Jeans 2-Hole Button Replacement: 手順 4、 3の画像 2 Jeans 2-Hole Button Replacement: 手順 4、 3の画像 3
    • Sew the thread in a small 'x' where you would like to place the button.

    • If you don't want to sew, then mark the spot with a white fabric marker.

  5. Jeans 2-Hole Button Replacement: 手順 5、 3の画像 1 Jeans 2-Hole Button Replacement: 手順 5、 3の画像 2 Jeans 2-Hole Button Replacement: 手順 5、 3の画像 3
    • Place the button over the small stitched 'x' or fabric marker spot.

    • Thread the needle through the left hole of the button from the inside out.

    • Pull the needle and thread all the way through the fabric.

    • If you can't find the hole of the button, thread the needle through the fabric first and then through the button hole.

  6. Jeans 2-Hole Button Replacement: 手順 6、 3の画像 1 Jeans 2-Hole Button Replacement: 手順 6、 3の画像 2 Jeans 2-Hole Button Replacement: 手順 6、 3の画像 3
    • Cross the needle over to the right hole of the button.

    • Thread the needle all the way through the fabric.

    • This step creates the first stitch.

  7. Jeans 2-Hole Button Replacement: 手順 7、 1の画像 1
    • Repeat Steps 6-7 four to five times, until you have a secure button.

  8. Jeans 2-Hole Button Replacement: 手順 8、 1の画像 1
    • Create a thread shank on the inside of the fabric by looping the thread around a stitch.

    • Pull the thread all the way through the hole until it is tight.

    • Repeat this 2-3 times.

    • Tie a knot after the final stitch to secure the stitches.

  9. Jeans 2-Hole Button Replacement: 手順 9、 2の画像 1 Jeans 2-Hole Button Replacement: 手順 9、 2の画像 2
    • Use fabric scissors to cut off excess thread.

終わりに

After cutting the remaining thread, your button stays on your jeans.

ある他の人がこのガイドを完成しました。

作成者

1人の作成者と共同作成されました。

Emily McKee

メンバー登録日: 03/17/21

200 ポイント

1ガイドが承認済み

チーム

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 6

過去 7 日: 26

過去 30 日: 73

今までの合計 945