Jean Zipper Repair

はじめに

Welcome to the guide that’s designed to help you keep your favorite pair of jeans with a working zipper. As time goes by those favorite pair of jeans tend to loosen up in some areas, the zipper being one of those areas. This guide will help you save money using these very easy steps. Follow this guide if you need to repair the zipper on your jeans.

必要な工具と部品

手順1 Jean Zipper Repair

Jean Zipper Repair, Jean Zipper Repair: 手順 1、 3の画像 1

Jean Zipper Repair, Jean Zipper Repair: 手順 1、 3の画像 2

Jean Zipper Repair, Jean Zipper Repair: 手順 1、 3の画像 3

Place your zipper in the upright position before trying to connect it to the zipper tracks.
If one of the zipper sides can be attached back on the tracks without any help, SKIP to Step 3.
If your zipper cannot be attached to the tracks easily, continue to the next step.

編集

手順2

Use the flathead screwdriver and place it in between the zipper sides.
Twist the flathead screwdriver back and forth while holding the zipper steady.
This will allow the zipper side to open wider so the zipper tracks can fit in between the zipper's sides.

編集

手順3

Attach the zipper to the zipper tracks.
Use the hammer to help close the zipper side onto the track.
Be sure to check that the zipper is secure on the track. Do this by moving the zipper up and down on the track and tugging on the zipper.

編集

手順4

Repeat Step 2 for the other side of the zipper.

編集

手順5

Make sure the tracks are even before hammering down the second side.
Pull and tug on the zipper and jeans until the tracks start lining up.

編集

手順6

Start hammering the top and sides of the zipper to secure the closing.
Check to make sure the zipper is attached by moving the zipper up and down.
Continue to hammer the top and sides if the tracks aren't connecting when you zip up the jeans.

編集

手順7

After hammering the zipper, everything should be secure. Move the zipper up and down a few more times to ensure the tracks are even, connecting and staying connected.

編集