メインコンテンツにスキップ

Jazz UltraTab C1059-HL Antenna Replacement

必要な工具と部品

  1. Jazz UltraTab C1059-HL Antenna Replacement, Antenna: 手順 1、 1の画像 1
    • First step is to remove screws from top and bottom of device.

  2. Jazz UltraTab C1059-HL Antenna Replacement: 手順 2、 1の画像 1
    • Remove the back panel of the device.

  3. Jazz UltraTab C1059-HL Antenna Replacement: 手順 3、 1の画像 1
    • Upon removing the back panel, place the device screen down on the table.

  4. Jazz UltraTab C1059-HL Antenna Replacement: 手順 4、 1の画像 1
    • Identify the antenna cover on the top of the device.

  5. Jazz UltraTab C1059-HL Antenna Replacement: 手順 5、 1の画像 1
    • Remove the two screws holding the antenna cover in place.

  6. Jazz UltraTab C1059-HL Antenna Replacement: 手順 6、 1の画像 1
    • Use a prying tool to remove the plastic piece off of the antenna component.

  7. Jazz UltraTab C1059-HL Antenna Replacement: 手順 7、 1の画像 1
    • Identify the antenna component as the gray cable that comes out of the plastic cover.

  8. Jazz UltraTab C1059-HL Antenna Replacement: 手順 8、 1の画像 1
    • Remove all of the adhesive tape pieces off of the antenna cable.

  9. Jazz UltraTab C1059-HL Antenna Replacement: 手順 9、 1の画像 1
    • Once all of the adhesive tape has been removed. Pull out the antenna component.

  10. Jazz UltraTab C1059-HL Antenna Replacement: 手順 10、 1の画像 1
    • The antenna will be attached to the chip in your device. Be careful not to pull off.

    • Solder of the wire that is connected to the chip in order to be able to remove the antenna component.

    • Once this is done, you can replace your old antenna with a new one!

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Amanda Justiniano

メンバー登録日: 09/19/15

231 ポイント

2のガイドは作成済み

チーム

IUPUI, Team 1-3, Wilson Fall 2015 IUPUI, Team 1-3, Wilson Fall 2015人のメンバー

IUPUI-WILSON-F15S1G3

4 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 2

今までの合計 192