メインコンテンツにスキップ

このバージョンは誤った内容を含んでいる可能性があります。最新の承認済みスナップショットに切り替えてください。

必要な工具と部品

  1. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 1、 1の画像 1
    • On the back of the camcorder, the side opposite of the flip-out screen, there is a section of grooved plastic with a small arrow.

    • Press down on the grooved plastic with your thumbs.

    • Push the back cover in the direction indicated by the small arrow on the grooved plastic. The back cover should slide right off.

  2. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 2、 1の画像 1
    • Once you have the back cover off, the camcorder should look like this.

    • Look on the battery for a model number to assure that you acquire the correct replacement part.

    • The camcorder model number is located in the red box. Verify that you have a Jazz HDV178.

  3. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 3、 1の画像 1
    • Take the battery out by pulling up on the bottom of the battery. You should be pulling from the side of the camera where the wrist strap is attached.

ゴール

2 の人々がこのガイドを完成させました。

作成者

10人の作成者と共同で作成されました。

timothy

メンバー登録日: 01/28/11

354 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 7-34, Regan Winter 2011 Cal Poly, Team 7-34, Regan Winter 2011人のメンバー

CPSU-REGAN-W11S7G34

4 メンバー

7のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 7

過去 30 日: 21

今までの合計 3,285