メインコンテンツにスキップ

Jabra Speak 510 Outer Casing Replacement

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. Jabra Speak 510 Outer Casing Replacement, Outer Casing: 手順 1、 2の画像 1 Jabra Speak 510 Outer Casing Replacement, Outer Casing: 手順 1、 2の画像 2
    • Using a metal spudger, peel back the foam pad on the bottom of the device to reveal six screws.

  2. Jabra Speak 510 Outer Casing Replacement: 手順 2、 1の画像 1
    • Remove the six 20 mm T6 screws from the bottom of the device.

  3. Jabra Speak 510 Outer Casing Replacement: 手順 3、 2の画像 1 Jabra Speak 510 Outer Casing Replacement: 手順 3、 2の画像 2
    • Remove the back plate and the grey foam underneath.

  4. Jabra Speak 510 Outer Casing Replacement: 手順 4、 3の画像 1 Jabra Speak 510 Outer Casing Replacement: 手順 4、 3の画像 2 Jabra Speak 510 Outer Casing Replacement: 手順 4、 3の画像 3
    • Use a small, pointed metal spudger to release the plastic tabs connecting the faceplate to the bottom of the speaker.

    • A small cable connects the faceplate to the device. Carefully disconnect the cable before fully opening the device.

    • Slowly flip the device open like a clam shell.

    • There are several wires soldered to the motherboard that prevent the faceplate from detaching completely.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Jordan Murphy

メンバー登録日: 02/16/16

717 ポイント

3のガイドは作成済み

チーム

IUPUI, Team 2-3, Harley Spring 2016 IUPUI, Team 2-3, Harley Spring 2016人のメンバー

IUPUI-HARLEY-S16S2G3

4 メンバー

8のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 135