メニュー

あなたの設定

私のワークベンチ

お持ちのデバイス用の修理ガイド、交換用パーツやアンサーフォーラムにアクセスする。
カート

カートには何も入っていません。

当社のショップを閲覧する

JVC GR-D93U Eye Piece Replacement

作成者： Lindsay (と他の投稿者)
  • コメント: 0
  • お気に入り: 1

難易度

普通

手順

6

所要時間

45分

セクション

1

フラグ

2

Needs Better Images

高画質の画像が必要

よりよい画像があればこのガイドが改善されます。よければ新しい写真を撮影し、編集し、アップロードしてお手伝いください。

Markup Mishap

間違いの指摘

このガイドは最適な校正が必要です。校正の注釈を付けたり訂正することにご協力ください。

はじめに

The JVC GR-D93U has both an LCD screen and an eye piece that you can use to see what you are recording.

ツール

これらのツールを購入する

パーツ

パーツは指定されていません。

  1. Unscrew two 3mm Phillips #0 screw from the bottom of the camera to remove blue plastic casing. Unscrew two 3mm Phillips #0 screw from the bottom of the camera to remove blue plastic casing.

    • Unscrew two 3mm Phillips #0 screw from the bottom of the camera to remove blue plastic casing.

    翻訳

  2. Unscrew two 3mm Phillips #0 screws. Then remove 6 3mm Philips #0 screws from the bottom of the camera. Unscrew two 3mm Phillips #0 screws. Then remove 6 3mm Philips #0 screws from the bottom of the camera.

    • Unscrew two 3mm Phillips #0 screws. Then remove 6 3mm Philips #0 screws from the bottom of the camera.

    翻訳

  4. Unscrew 3mm Phillips #0 screws from the batter port under the eye piece.

    • Unscrew 3mm Phillips #0 screws from the batter port under the eye piece.

    翻訳

  5. Now the camera can be split into two pieces. Be careful when removing the two sides and remove the cables connecting the two halves. There are also cables that need to be disconnected from the battery pack section. Now the camera can be split into two pieces. Be careful when removing the two sides and remove the cables connecting the two halves. There are also cables that need to be disconnected from the battery pack section.

    • Now the camera can be split into two pieces. Be careful when removing the two sides and remove the cables connecting the two halves. There are also cables that need to be disconnected from the battery pack section.

    翻訳

  6. Unscrew two 3mm Phillips #0 screws from around the eye piece. Then flip the camera over and unscrew 3mm Phillips #0 screw. Then unscrew 3mm Phillips #0 screw from under the eye piece. Unscrew two 3mm Phillips #0 screws from around the eye piece. Then flip the camera over and unscrew 3mm Phillips #0 screw. Then unscrew 3mm Phillips #0 screw from under the eye piece. Unscrew two 3mm Phillips #0 screws from around the eye piece. Then flip the camera over and unscrew 3mm Phillips #0 screw. Then unscrew 3mm Phillips #0 screw from under the eye piece.

    • Unscrew two 3mm Phillips #0 screws from around the eye piece. Then flip the camera over and unscrew 3mm Phillips #0 screw. Then unscrew 3mm Phillips #0 screw from under the eye piece.

    翻訳

  7. Unscrew 3mm Phillips #0 screw and disconnect cable. This will disconnect the eye piece from the camera. Unscrew 3mm Phillips #0 screw and disconnect cable. This will disconnect the eye piece from the camera.

    • Unscrew 3mm Phillips #0 screw and disconnect cable. This will disconnect the eye piece from the camera.

    翻訳
まとめ

To reassemble your device, follow these instructions in reverse order.

作成者

1他の投稿者と一緒に

Lindsay

メンバー登録日: 2015年03月16日

231 ポイント

2のガイドは作成済み

バッジ: 8

+5 個以上のバッジ

チーム

Colorado Springs, Team 1-5, May Spring 2015 Colorado Springs, Team 1-5, May Spring 2015人のメンバー

UCCS-MAY-S15S1G5

4 メンバー

3のガイドは作成済み

0コメント

コメントを追加

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 150