JBL Xtreme 2 Speaker Replacement

はじめに

If you’re JBL Xtreme 2's speaker sounds disoriented or is making no sound, use this guide to replace the speaker(s). The speakers inside are used to make the bass for the experience of listening to music. When a speaker is damaged you will hear distorted music or none at all.

Before beginning make sure to power off the speaker and disconnect from any external power source.

必要な工具と部品

手順1 Speaker

JBL Xtreme 2 Speaker Replacement, Speaker: 手順 1、 2の画像 1

JBL Xtreme 2 Speaker Replacement, Speaker: 手順 1、 2の画像 2

Use a spudger or other prying tool to gently pry open the middle section of the speaker.

編集

手順2

To open the case, open the front side gently rotating along the hinge.

編集

手順3

Once you have the speakers exposed like in the image, at the bottom part you will snap open the back end piece of the grill still attached.

編集

手順4

JBL Xtreme 2 Speaker Replacement: 手順 4、 3の画像 3

Using a Phillips #00 screwdriver, remove the four 12.9 mm screws securing the faulty speaker.
Once you remove the screws, the speaker will be loose and you will be able to move it around easily.

編集

手順5

JBL Xtreme 2 Speaker Replacement: 手順 5、 3の画像 3

Lift the speaker out of its housing and you will see two cables connecting the speaker. Pull the speaker towards you and each of the cable connectors away from you.
Do the same for both cables.

編集