はじめに

This guide shows you how to remove the bottom plate, this provides access to the subwoofer itself.

Locate the 3 risers the hold the base plate in place
  • Locate the 3 risers the hold the base plate in place

コメントを追加する

Insert a strong spudger or flathead near the riser and gently pry until the plug starts to come out. Work your way around to loosening  each one.
  • Insert a strong spudger or flathead near the riser and gently pry until the plug starts to come out. Work your way around to loosening each one.

コメントを追加する

With all three loosened remove the base!
  • With all three loosened remove the base!

  • Note the not equilateral placement of the risers when replacing the base.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

7 の人々がこのガイドを完成させました。

Ryan McLeod

メンバー登録日: 2010年05月22日

355 ポイント

2のガイドは作成済み

Thanks, so nice tip. I'll see if I can find a similar speaker, big hug.

durval - 返信

My speaker is broken like on the image above and it sounds horrible. Do you know where to buy similar speaker in order to replice it?

pszopa - 返信

Does anybody know, if I can get a replacement speaker for the subwoofer of the JBL 2.1. system? Thanks!

Lars -

I was unable to find a replacement for the Atlas subwoofer it uses and ended up "recycling" the whole thing :( I've since replaced it with the the Klipsch ProMedia 2.1s and love them.

Ryan McLeod -

コメントを追加する

統計データを表示:

過去 24時間: 3

過去 7 日: 25

過去 30 日: 122

今までの合計 5,043