JBL Flip 5 Speaker Replacement - iFixit 修理ガイド

はじめに

Taking out the speaker for a replacement

必要な工具と部品

手順1 Outer Case

JBL Flip 5 Speaker Replacement, Outer Case: 手順 1、 2の画像 1

JBL Flip 5 Speaker Replacement, Outer Case: 手順 1、 2の画像 2

Insert the flat edge of the metal spudger underneath the corner of the outer case.
Use the spudger to pry open the plastic clips that secure the outer case.

手順2

JBL Flip 5 Speaker Replacement: 手順 2、 1の画像 1

Once all the clips are released, you will be able to pull up that edge of the case.

手順3

JBL Flip 5 Speaker Replacement: 手順 3、 1の画像 1

Once one side is released, complete the previous two steps with the other side.
This side contains the buttons, so be careful so as to not damage them while prying the case off.

手順4

JBL Flip 5 Speaker Replacement: 手順 4、 2の画像 1

JBL Flip 5 Speaker Replacement: 手順 4、 2の画像 2

Once all the clips are removed, you can gently remove the outer case.
The case is now fully removed. Now a new case will be attached by putting the case into position and pushing on the clips to reattach them.

手順5 Speaker

JBL Flip 5 Speaker Replacement, Speaker: 手順 5、 1の画像 1

Begin by unscrewing the four 9.6 mm-long screws with the Philips #00 screwdriver.

手順6

JBL Flip 5 Speaker Replacement: 手順 6、 1の画像 1

Once screws are fully out make sure to carefully pull out so the wires connected don't get damaged.

手順7

JBL Flip 5 Speaker Replacement: 手順 7、 1の画像 1

Once you carefully lift up the speaker, gently disconnect the wire that connects the speaker to the motherboard.

手順8

JBL Flip 5 Speaker Replacement: 手順 8、 1の画像 1

Once connection has been disconnected you can lift the speaker completely out.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Gaurang Karpe

メンバー登録日: 10/30/23

109 ポイント

1ガイドが承認済み

チーム

UMass Dartmouth, Team 3-5, Konn Fall 2023 UMass Dartmouth, Team 3-5, Konn Fall 2023人のメンバー

UMASSD-KONN-F23S3G5

4 メンバー

5のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 2

過去 7 日: 26

過去 30 日: 115

今までの合計 344