はじめに

This guide details the steps to take off the back cover of your Inter-tel IP 8660 handset.

パーツ

パーツは必要ありません。

Disconnect the phone cord from the handset jack.
  • Disconnect the phone cord from the handset jack.

コメントを追加する

Unscrew the two black screws (8 mm long) located in the middle of the handset using #1 Phillips head. Unscrew the two black screws (8 mm long) located in the middle of the handset using #1 Phillips head.
  • Unscrew the two black screws (8 mm long) located in the middle of the handset using #1 Phillips head.

コメントを追加する

Pry the back cover off the headset using a spudger. It is best to pry at the top of the handset. Pry the back cover off the headset using a spudger. It is best to pry at the top of the handset.
  • Pry the back cover off the headset using a spudger. It is best to pry at the top of the handset.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Juan David GutierrezFranco

メンバー登録日: 2012年01月20日

67 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 11-24, Maness Winter 2012 Cal Poly, Team 11-24, Maness Winter 2012人のメンバー

CPSU-MANESS-W12S11G24

4 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 554