Insignia NS-VCS14SL7 Stick Vacuum Power Button Replacement

はじめに

The Insignia 2-in-1 stick vacuum power button can suddenly stop working or become jammed. In either case, use this guide to fix or replace the power button.

必要な工具と部品

手順1 Stick Vacuum Power Button

Insignia NS-VCS14SL7 Stick Vacuum Power Button Replacement, Stick Vacuum Power Button: 手順 1、 3の画像 1

Insignia NS-VCS14SL7 Stick Vacuum Power Button Replacement, Stick Vacuum Power Button: 手順 1、 3の画像 2

Insignia NS-VCS14SL7 Stick Vacuum Power Button Replacement, Stick Vacuum Power Button: 手順 1、 3の画像 3

Remove the four 12mm Phillips screws , and the one large 32mm Phillips head bolt from the vacuum handle.
Pull up on the back cover of the vacuum handle and remove it.

翻訳

手順2

Insignia NS-VCS14SL7 Stick Vacuum Power Button Replacement: 手順 2、 3の画像 3

Remove the two 10mm Phillips #2 screws on the back of the green printed circuit board.
If the circuit board needs to be replaced, locate where the two white wires are soldered to the board, and de-solder the connection.

翻訳