メインコンテンツにスキップ

Insignia NS-VCS14SL7 Motor Replacement

必要な工具と部品

  1. Insignia NS-VCS14SL7 Motor Replacement, Battery: 手順 1、 2の画像 1 Insignia NS-VCS14SL7 Motor Replacement, Battery: 手順 1、 2の画像 2
    • Push down the black button to release the dust cup.

    • Pull the dust cup up and away from handheld portion to remove.

  2. Insignia NS-VCS14SL7 Motor Replacement: 手順 2、 3の画像 1 Insignia NS-VCS14SL7 Motor Replacement: 手順 2、 3の画像 2 Insignia NS-VCS14SL7 Motor Replacement: 手順 2、 3の画像 3
    • Remove the five 12.0 mm screws on the back of the handheld portion using the Phillips #2 screwdriver.

    • Lift the silver cover off of the black body of the handheld portion to expose the battery and wiring.

  3. Insignia NS-VCS14SL7 Motor Replacement: 手順 3、 2の画像 1 Insignia NS-VCS14SL7 Motor Replacement: 手順 3、 2の画像 2
    • Pull apart the red and black wires.

    • Do so for all of the wires. (Red x1, Black x2)

  4. Insignia NS-VCS14SL7 Motor Replacement: 手順 4、 1の画像 1
    • Remove the tape holding the battery to the black housing.

    • Slide the entire battery bundle out.

  5. Insignia NS-VCS14SL7 Motor Replacement, Motor: 手順 5、 2の画像 1 Insignia NS-VCS14SL7 Motor Replacement, Motor: 手順 5、 2の画像 2
    • Use plastic spudger to remove blue wire from motor, freeing the motor.

  6. Insignia NS-VCS14SL7 Motor Replacement: 手順 6、 2の画像 1 Insignia NS-VCS14SL7 Motor Replacement: 手順 6、 2の画像 2
    • Twist and pull black casing off of the motor, leaving the motor and irremovable black impeller housing.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Thibaut Pillot

メンバー登録日: 02/15/18

434 ポイント

5のガイドは作成済み

チーム

USF Tampa, Team S16-G3, Boczar Spring 2018 USF Tampa, Team S16-G3, Boczar Spring 2018人のメンバー

USFT-BOCZAR-S18S16G3

4 メンバー

12のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 4

今までの合計 347