Insignia NS-CLOPP2 Speaker Replacement

はじめに

An Insignia NS-CLOPP2 Speaker is used to wake one up with a clear alarm for waking up on time as well as a built-in radio tuner for listening entertainment. Here are the tools, skills, and requirements needed to replace a broken Insignia NS-CLOPP2 Speaker that is no longer creating any type of noise or the speaker is creating gray noise.

必要な工具と部品

手順1 Speaker

Insignia NS-CLOPP2 Speaker Replacement, Speaker: 手順 1、 1の画像 1

First, unscrew the back panel with a 1/3 Phillips screwdriver, and make sure the motherboard has been pulled out, not cutting any of the wires attached, exposing the blue speaker.

翻訳

手順2

Locate the speaker, the dark blue colored circular device, pictured in the center of the photo.

翻訳

手順3

Using a plastic opening tool, scrape off the glue attaching the speaker to the black plastic of the clock.

翻訳

手順4

Lastly, once the adhesive has been removed, gently lift the speaker out of place.
To put a replacement speaker in, use technology-friendly adhesive to glue it back in place.
To reassemble your device, follow these instructions in reverse order.