Insignia NS-CLIP02 Power Auxiliary Port Replacement Replacement

はじめに

The Insignia NS-CLIP02 can develop a problem with power auxiliary ports malfunctioning, but don’t worry. They’re replaceable! If your device is not charging, this may be a key indicator that the port needs to be replaced.

Use this simple step-by-step guide to replace your motherboard that contains the auxiliary port in 30 minutes or less.

必要な工具と部品

手順1 Power Auxiliary Port Replacement

Insignia NS-CLIP02 Power Auxiliary Port Replacement Replacement, Power Auxiliary Port Replacement: 手順 1、 1の画像 1

Locate the bottom of the device.

翻訳

手順2

Peel back the adhesive sticker using a metal spudger and remove the 11mm screw beneath the sticker with a Phillips head screw driver.

翻訳

手順3

Using a plastic spudger, peel off the adhesive gel stoppers.

翻訳

手順4

Unscrew the six 11mm screws with a Phillips head screw driver.

翻訳

手順5

Remove the bottom of the device to reveal the motherboard.

翻訳

手順6

Unscrew the 9.5mm screw located near the center of the motherboard with a Phillips head screw driver.

翻訳

手順7

Lift the motherboard from the device and lie it face down. Beware of the cables plugged in on the back side

翻訳

手順8

Remove the plug to your left.

翻訳

手順9

Remove the plug to your right from the motherboard.

翻訳

手順10

Remove the plug in the front of the lcd screen plug.

翻訳

手順11

Remove the LCD screen plug last. For reassembly, follow the instructions in reverse order, replacing the old motherboard with the new one to fix the power auxiliary port.

翻訳