メインコンテンツにスキップ

Insignia NS-CLIP02 Digital Display Replacement

必要な工具と部品

  1. Insignia NS-CLIP02 Digital Display Replacement, Motherboard: 手順 1、 1の画像 1
    • Set the clock radio on the work space so the bottom of the device is showing.

  2. Insignia NS-CLIP02 Digital Display Replacement: 手順 2、 2の画像 1 Insignia NS-CLIP02 Digital Display Replacement: 手順 2、 2の画像 2
    • Use a metal spudger to peel back the adhesive sticker on the bottom of the clock.

    • You should see a single screw beneath the sticker.

  3. Insignia NS-CLIP02 Digital Display Replacement: 手順 3、 2の画像 1 Insignia NS-CLIP02 Digital Display Replacement: 手順 3、 2の画像 2
    • Using a plastic opening tool, peel off the adhesive gel stoppers.

  4. Insignia NS-CLIP02 Digital Display Replacement: 手順 4、 1の画像 1
    • Use a Phillips screwdriver to remove the six 11 mm screws on the bottom of the device.

  5. Insignia NS-CLIP02 Digital Display Replacement: 手順 5、 1の画像 1
    • Remove the bottom cover from the device to reveal the motherboard.

  6. Insignia NS-CLIP02 Digital Display Replacement: 手順 6、 1の画像 1
    • Use a Phillips screwdriver to remove the 9.5 mm screw located near the center of the motherboard.

  7. Insignia NS-CLIP02 Digital Display Replacement: 手順 7、 1の画像 1
    • Lift the motherboard away from the device.

  8. Insignia NS-CLIP02 Digital Display Replacement: 手順 8、 3の画像 1 Insignia NS-CLIP02 Digital Display Replacement: 手順 8、 3の画像 2 Insignia NS-CLIP02 Digital Display Replacement: 手順 8、 3の画像 3
    • Disconnect the four cables connecting the motherboard to the device.

  9. Insignia NS-CLIP02 Digital Display Replacement, Digital Display: 手順 9、 1の画像 1
    • Using the Phillips screwdriver, remove the three screws that run along the center of the base.

  10. Insignia NS-CLIP02 Digital Display Replacement: 手順 10、 2の画像 1 Insignia NS-CLIP02 Digital Display Replacement: 手順 10、 2の画像 2
    • Carefully remove the base.

  11. Insignia NS-CLIP02 Digital Display Replacement: 手順 11、 2の画像 1 Insignia NS-CLIP02 Digital Display Replacement: 手順 11、 2の画像 2
    • Using the metal spudger, gently lift the face plate away from the display.

  12. Insignia NS-CLIP02 Digital Display Replacement: 手順 12、 1の画像 1
    • Once the face plate is removed, use the Phillips screwdriver to remove the six screws shown here.

  13. Insignia NS-CLIP02 Digital Display Replacement: 手順 13、 2の画像 1 Insignia NS-CLIP02 Digital Display Replacement: 手順 13、 2の画像 2
    • Using the metal spudger, lift the speaker grilles from the display.

    • The speaker grilles will hinge on the side closest to the display.

  14. Insignia NS-CLIP02 Digital Display Replacement: 手順 14、 1の画像 1
    • Using the Phillips screwdriver, remove the four screws shown here.

  15. Insignia NS-CLIP02 Digital Display Replacement: 手順 15、 2の画像 1 Insignia NS-CLIP02 Digital Display Replacement: 手順 15、 2の画像 2
    • The two pieces of the display should easily separate.

  16. Insignia NS-CLIP02 Digital Display Replacement: 手順 16、 1の画像 1
    • Using the Phillips screwdriver, remove the three screws shown here.

  17. Insignia NS-CLIP02 Digital Display Replacement: 手順 17、 3の画像 1 Insignia NS-CLIP02 Digital Display Replacement: 手順 17、 3の画像 2 Insignia NS-CLIP02 Digital Display Replacement: 手順 17、 3の画像 3
    • The digital display should now be easy to remove.

    • Replace with new part.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Aubrey

メンバー登録日: 02/24/15

214 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 9-3, Leahy Winter 2015 USF Tampa, Team 9-3, Leahy Winter 2015人のメンバー

USFT-LEAHY-W15S9G3

4 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 463