修理を始めるには コミュニティ ストア

Insignia NS-BCDCAS1 CD Laser Lens Replacement

はじめに

This product plays both CD's and Cassettes as well as AM/FM radio stations.

Before attempting this replacement, make sure to use a anti-static strap to prevent circuit damages to your device.

必要な工具と部品

  1. Insignia NS-BCDCAS1 CD Laser Lens Replacement, Outer Panels: 手順 1、 2の画像 1 Insignia NS-BCDCAS1 CD Laser Lens Replacement, Outer Panels: 手順 1、 2の画像 2

    • Turn the boombox around to see the back, and then flip it upside down.

    • Insert a 2.5mm flathead driver into the two holes next to the battery compartment.

    • Turn the driver counterclockwise several times to loosen and pull out the 17mm screw.

    編集

  2. Insignia NS-BCDCAS1 CD Laser Lens Replacement: 手順 2、 1の画像 1

    • Peel off the two black square foams in front of the battery compartment to reveal a screw under each one.

    編集

  3. Insignia NS-BCDCAS1 CD Laser Lens Replacement: 手順 3、 2の画像 1 Insignia NS-BCDCAS1 CD Laser Lens Replacement: 手順 3、 2の画像 2

    • Remove the two 8mm screws using a 2.5mm flathead driver.

    • The front grey panel will loosen up once the final screw is removed.

    編集

  4. Insignia NS-BCDCAS1 CD Laser Lens Replacement: 手順 4、 1の画像 1

    • Turn the boombox on its back.

    • Release the front panel by pushing down on the latches holding the panels together.

    • There are four silver latches on the top side of the panel and one on the bottom.

    • Do not force the panel comletely off, there are cables attached inside.

    編集

  6. Insignia NS-BCDCAS1 CD Laser Lens Replacement: 手順 5、 2の画像 1 Insignia NS-BCDCAS1 CD Laser Lens Replacement: 手順 5、 2の画像 2

    • Turn the boombox around to view the back and lift the handle up.

    • Using the same driver with 2.5mm flathead, remove the two 14mm screws under the handle.

    • Gently lift the black top but do not pull completely away.

    編集

  7. Insignia NS-BCDCAS1 CD Laser Lens Replacement, CD Laser Lens: 手順 6、 1の画像 1

    • Unplug the red and black wires from the large yellow motherboard by pulling upwards.

    編集

  8. Insignia NS-BCDCAS1 CD Laser Lens Replacement: 手順 7、 1の画像 1

    • Unplug the thick, white and pink cord from underneath the black top by pulling downwards.

    編集

  9. Insignia NS-BCDCAS1 CD Laser Lens Replacement: 手順 8、 1の画像 1

    • Remove the black shiny strip from both ends of the white motherboard adaptor.

    編集

  10. Insignia NS-BCDCAS1 CD Laser Lens Replacement: 手順 9、 1の画像 1

    • Using a Phillips #0, remove the two 11mm screws attached to the green legs underneath the top panel.

    編集

  11. Insignia NS-BCDCAS1 CD Laser Lens Replacement: 手順 10、 1の画像 1

    • With a plastic opening tool, take off the red rings on the other two green legs.

    • The red rings fall off easily once loosened.

    編集

  12. Insignia NS-BCDCAS1 CD Laser Lens Replacement: 手順 11、 1の画像 1

    • Using a JIS 1, remove the 8mm screw on the grey, square plate.

    編集

  13. Insignia NS-BCDCAS1 CD Laser Lens Replacement: 手順 12、 3の画像 1 Insignia NS-BCDCAS1 CD Laser Lens Replacement: 手順 12、 3の画像 2 Insignia NS-BCDCAS1 CD Laser Lens Replacement: 手順 12、 3の画像 3

    • Slide the silver bar out.

    • Everything will be loosened. Support it with your hand

    • The square cube with the tiny lense is loosened. Slide it down to take out of the nook.

    • Detach the black tape so the cube is completely by itself. Replace the cube with a new one.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

4人の作成者と共同で作成されました。

Erin King

メンバー登録日: 09/12/16

215 ポイント

2のガイドは作成済み

バッジ: 6

+3 個以上のバッジ

チーム

CSU Fullerton, Team 2-5, Bruce Fall 2016 CSU Fullerton, Team 2-5, Bruce Fall 2016人のメンバー

CSUF-BRUCE-F16S2G5

4 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 14

今までの合計 969