Insignia NS-B4111 Motherboard Replacement - iFixit 修理ガイド

必要な工具と部品

手順1 Motherboard

Insignia NS-B4111 Motherboard Replacement, Motherboard: 手順 1、 1の画像 1

Unscrew the four 12.5mm screws with the Phillips PH1 Screwdriver.
Unscrew the one 10mm long screw with the Phillips PH1 Screwdriver.

手順2

Insignia NS-B4111 Motherboard Replacement: 手順 2、 1の画像 1

Orient the device so that the back is facing you.
Unplug the six pin male/female header from its socket on the motherboard. The wires on the header are these colors: burgundy, red, orange, yellow, green, and blue.
Use a tweezer if you find it hard to pull the header out with your fingers.
Gently pull out the ribbon cable from its socket on the motherboard.
Pay attention to the orientation of the header and the ribbon cable. Replacing the wires the wrong way may short circuit the board.

手順3

Insignia NS-B4111 Motherboard Replacement: 手順 3、 1の画像 1

Rotate the device so that the front is facing you.
Unplug the four pin header from its socket on the motherboard. The wires on the header are these colors: brown, red, orange, and yellow.
Use a tweezer if you find it hard to pull this header out with your fingers.
Gently pull out the ribbon cable from its socket.
Pay attention to the orientation of the header and the ribbon cable. Replacing the base the wrong way may short circuit the board.

手順4

Insignia NS-B4111 Motherboard Replacement: 手順 4、 1の画像 1

Pull out the two pin header from its socket on the motherboard. The wires on this header are black and white.
Use a tweezer if you find it hard to pull this cable out with your fingers.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Kristin Yoshioka

メンバー登録日: 09/21/16

984 ポイント

9のガイドは作成済み

+4 個以上のバッジ

チーム

UC Davis, Team 1-5, Oliver Fall 2016 UC Davis, Team 1-5, Oliver Fall 2016人のメンバー

UCD-OLIVER-F16S1G5

5 メンバー

11のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 1

今までの合計 72