修理を始めるには コミュニティ ストア

Insignia Flex 8 NS-P16AT08 Screen Replacement

はじめに

The screen is the most essential part of any tablet. If it is not working, follow this guide to remove and replace it. There are tiny screws, be sure to know where they are at all times.

必要な工具と部品

  1. Insignia Flex 8 NS-P16AT08 Screen Replacement, Back Casing: 手順 1、 3の画像 1 Insignia Flex 8 NS-P16AT08 Screen Replacement, Back Casing: 手順 1、 3の画像 2 Insignia Flex 8 NS-P16AT08 Screen Replacement, Back Casing: 手順 1、 3の画像 3

    • Make sure device is powered off.

    • Wedge the plastic opening tool anywhere in the seam between the back casing and screen.

    • Slide the plastic opening tool along the sides and corners of the seam of the device while it separates from the screen.

    • You will hear the popping sound of the plastic connections separating from the device.

    編集

  2. Insignia Flex 8 NS-P16AT08 Screen Replacement: 手順 2、 1の画像 1

    • Lift the back casing away from the screen.

    • Set casing aside.

    編集

  3. Insignia Flex 8 NS-P16AT08 Screen Replacement, Screen: 手順 3、 2の画像 1 Insignia Flex 8 NS-P16AT08 Screen Replacement, Screen: 手順 3、 2の画像 2

    • Pull gently on the cable that connects the microphone to the motherboard.

    • The microphone will stay attached to device and separated from motherboard.

    編集

  4. Insignia Flex 8 NS-P16AT08 Screen Replacement: 手順 4、 2の画像 1 Insignia Flex 8 NS-P16AT08 Screen Replacement: 手順 4、 2の画像 2

    • Flip up the black flap of the connector ribbon that connects the screen to the motherboard.

    • Connector ribbon will stay attached to the device and separted from the motherboard.

    • If the black flap of connector will not lift by using your finger, then use the nylon spudger.

    編集

  6. Insignia Flex 8 NS-P16AT08 Screen Replacement: 手順 5、 1の画像 1

    • Gently pull the connector ribbon by hand from the connector until it separates from connector.

    編集

  7. Insignia Flex 8 NS-P16AT08 Screen Replacement: 手順 6、 2の画像 1 Insignia Flex 8 NS-P16AT08 Screen Replacement: 手順 6、 2の画像 2

    • Flip up the black flap of the connector ribbon that connects the buttons to the motherboard.

    • The connector ribbon will stay attached to the device and separted from the motherboard.

    • If the black flap of the connector will not lift by using your finger, then use the nylon spudger.

    編集

  8. Insignia Flex 8 NS-P16AT08 Screen Replacement: 手順 7、 1の画像 1

    • Gently pull the connector ribbon by hand from the connector until it separates from the connector.

    編集

  9. Insignia Flex 8 NS-P16AT08 Screen Replacement: 手順 8、 2の画像 1 Insignia Flex 8 NS-P16AT08 Screen Replacement: 手順 8、 2の画像 2

    • Gently pry the cameras from device using metal spudger tool.

    • Always try using a plastic opening tool or nylon spudger first. Metal spudgers are great for serious prying power but can damage your device if used incorrectly.

    • The cameras and connector ribbon will stay attached to motherboard.

    編集

  10. Insignia Flex 8 NS-P16AT08 Screen Replacement: 手順 9、 1の画像 1

    • Remove the tape that is covering the screen motherboard connector ribbon.

    • The screen connection will now be exposed.

    編集

  11. Insignia Flex 8 NS-P16AT08 Screen Replacement: 手順 10、 2の画像 1 Insignia Flex 8 NS-P16AT08 Screen Replacement: 手順 10、 2の画像 2

    • Flip up the black flap of the connector that connects the screen to the motherboard.

    • If the black flap of connector will not lift by using your finger, then use the nylon spudger.

    • Gently pull the connector ribbon by hand from the connector until it separates from the connector.

    • The connector ribbon will remain attached to the motherboard and separated from the screen.

    編集

  12. Insignia Flex 8 NS-P16AT08 Screen Replacement: 手順 11、 2の画像 1 Insignia Flex 8 NS-P16AT08 Screen Replacement: 手順 11、 2の画像 2

    • Using a PH00 screwdriver, remove the (7) seven silver screws that connect the metal plate to the device.

    • Using a PH00 screwdriver, remove the (3) three black screws that connect the motherboard to the device.

    編集

  13. Insignia Flex 8 NS-P16AT08 Screen Replacement: 手順 12、 1の画像 1

    • Gently lift the metal plate that is attached to the motherboard and battery and set aside.

    • Do not force the metal plate to separate from the screen!

    • If the metal plate does not separate from device freely, then you have not disconnected a connector ribbon or you have not removed all the screws. Repeat step 10.

    • Screen will now be exposed.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Emily Guidinger

メンバー登録日: 04/01/16

527 ポイント

4のガイドは作成済み

バッジ: 10

+7 個以上のバッジ

チーム

Eastern Washington University, Team 2-1, Andersen Spring 2016 Eastern Washington University, Team 2-1, Andersen Spring 2016人のメンバー

EWU-ANDERSEN-S16S2G1

5 メンバー

10のガイドは作成済み

コメント 1 件

Where to buy it the display?

krnes1979 - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 5

今までの合計 854