メインコンテンツにスキップ

Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement

  1. Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement, Rubber Gasket: 手順 1、 1の画像 1
    • Remove lid and place upside down on a flat surface.

  2. Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement: 手順 2、 2の画像 1 Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement: 手順 2、 2の画像 2
    • Grab the edge of the clear rubber gasket and slowly peel it off the lid.

    • Continue peeling off the gasket until it is completely detached from the lid.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Savannah Webb

メンバー登録日: 01/18/18

657 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team S12-G3, Banghart Winter 2018 Cal Poly, Team S12-G3, Banghart Winter 2018人のメンバー

CPSU-BANGHART-W18S12G3

4 メンバー

5のガイドは作成済み

3 件のコメント

Am having trouble Turning the lid from Unlock to lock. The pin comes out in the back when I go to turn it from unlock to lock. Can you help me?

pclarkrob3 - 返信

I bought the insignia pressure cooker at a garage sale but, the rubber gasket smells bad. I’ve cleaned the entire cooker but, that gasket stinks like no other

Chuck Smith - 返信

I am having the same problem as the first comment by pclarkrob3 I am having trouble turning the lid from unlock to lock. These are really crappy instructions!!!! I have only used my pressure cooker twice so everything is still new.

Vivian Lang - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 10

今までの合計 1,222