修理を始めるには コミュニティ ストア

Insignia 6-Quart Pressure Cooker Circuit Board Replacement

はじめに

Circuit boards may require replacement after consistent use. This guide will show how to remove the circuit board.

必要な工具と部品

  1. Insignia 6-Quart Pressure Cooker Circuit Board Replacement, Circuit Board and Power Cord: 手順 1、 1の画像 1

    • Use a Phillips head #2 screwdriver to remove the 6mm screw.

    編集

  2. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 手順 2、 1の画像 1

    • Twist the light grey plastic until the holes align with the blockers.

    • Remove the light grey plastic cover.

    編集

  3. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 手順 3、 1の画像 1

    • Remove the power cord from the slot it is inserted in.

    編集

  4. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 手順 4、 1の画像 1

    • Use a Phillips head #2 screwdriver to remove the 22mm screw connected to the black wire.

    編集

  5. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 手順 5、 1の画像 1

    • Use a Phillips head #2 screwdriver to remove the 8mm screw and it's washer from the red wire.

    編集

  7. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 手順 6、 1の画像 1

    • Use a Phillips head #2 screwdriver to remove the 8mm screw and it's washer from the blue wire.

    編集

  8. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 手順 7、 1の画像 1

    • Pinch the small white component connected to the circuit board.

    • Once pinched, wiggle this component until it is disconnected.

    編集

  9. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 手順 8、 1の画像 1

    • Pinch the red component connected to the circuit board.

    • Once pinched, wiggle this component until it is disconnected.

    編集

  10. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 手順 9、 1の画像 1

    • Wiggle the wide white component until it is removed from the circuit board.

    編集

  11. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 手順 10、 1の画像 1

    • Use a J1 head screwdriver to remove the 8mm screws from both sides of the circuit board.

    編集

  12. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 手順 11、 1の画像 1

    • Use a Phillips head #2 screwdriver to remove both 15mm screws from either side of the circuit board, indicated in the picture.

    編集

  13. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 手順 12、 1の画像 1

    • Position the pressure cooker so that the circuit board is farther from you then the black, red, and blue wire connections.

    • To the right of the board, use a Phillips head #2 screwdriver to remove the 6mm screw.

    編集

  14. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 手順 13、 1の画像 1

    • Use a Phillips head #2 screwdriver to remove the 6mm screw behind and to the right of the circuit board tray.

    編集

  15. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 手順 14、 1の画像 1

    • Remove and replace the circuit board.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

作成者

5人の作成者と共同で作成されました。

Savannah Webb

メンバー登録日: 01/18/18

657 ポイント

5のガイドは作成済み

バッジ: 7

+4 個以上のバッジ

チーム

Cal Poly, Team S12-G3, Banghart Winter 2018 Cal Poly, Team S12-G3, Banghart Winter 2018人のメンバー

CPSU-BANGHART-W18S12G3

4 メンバー

5のガイドは作成済み

8 件のコメント

Where do you purchase the circuit board

Douglas Koons - 返信

Hi, thanks for the guide. Where could I purchase the circuit board?

Anthea - 返信

Please, Where can I buy the electrical circuit?

Mohammed - 返信

why is my circuit board not fixed to the top like in the diagram

david stanley - 返信

where can I purchase the circuit board

de27@bellsouth.net - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 10

今までの合計 3,141