はじめに

Follow this guide to remove and replace, repair, or clean the access door.

Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters. Remove the hex head bolt from the top of the access door on the pump head.
  • Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters.

  • Remove the hex head bolt from the top of the access door on the pump head.

  • On reassembly, this bolt should be hand-tight.

コメントを追加する

Pull the access door straight up off the pump head. Store the access door in a sanitary place to prevent contamination. Store the access door in a sanitary place to prevent contamination.
  • Pull the access door straight up off the pump head.

  • Store the access door in a sanitary place to prevent contamination.

コメントを追加する

The access door has a tongue that fits into the base of the pump head. The access door makes a convenient tray to hold nuts and bolts during the disassembly.
  • The access door has a tongue that fits into the base of the pump head.

  • The access door makes a convenient tray to hold nuts and bolts during the disassembly.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Andrew Optimus Goldberg

メンバー登録日: 2009年10月17日

368,907 ポイント

1,264のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Community

115 メンバー

5,778のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 97