メインコンテンツにスキップ

はじめに

Prereq only.

  1. The last section of riser main pipe will have the pump cylinder attached to the bottom.
    • The last section of riser main pipe will have the pump cylinder attached to the bottom.

    • Pull the assembly of riser main pipe and cylinder out of the well and set the assembly on a block of wood to keep the cylinder off the ground.

  2. Using two pipe wrenches, unscrew the cylinder from the riser main. Using two pipe wrenches, unscrew the cylinder from the riser main. Using two pipe wrenches, unscrew the cylinder from the riser main.
    • Using two pipe wrenches, unscrew the cylinder from the riser main.

  3. Slowly pull the cylinder off of the pump rod, exposing the traveling valve and foot valve. Slowly pull the cylinder off of the pump rod, exposing the traveling valve and foot valve.
    • Slowly pull the cylinder off of the pump rod, exposing the traveling valve and foot valve.

終わりに

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

メンバー登録日: 2009年10月17日

475,745 ポイント

410のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Community

137 メンバー

16,772のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 11