はじめに
The Mini-PCI port can be accessed easily after removing the rear cover
必要な工具と部品
-
-
Use a Phillips #0 screwdriver to remove the twenty screws on the underside of the T42.
-
-
-
Remove the four Phillips screws located on either side of the rear of the T42 (there are two on each end.)
-
-
-
Flip the laptop over and open the screen to access the keyboard and trackpad.
-
-
もう少しです!
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.
ある他の人がこのガイドを完成しました。