パーツ

パーツは必要ありません。

  1. Unscrew the 20 Phillips screws on the underside of the T42.
    • Unscrew the 20 Phillips screws on the underside of the T42.

      • For ease of reassembly, keep your screws organized.

    コメントを追加する

  2. Unscrew the 2 Phillips screws on both sides of the T42's rear.
    • Unscrew the 2 Phillips screws on both sides of the T42's rear.

    leave these four screws alone. No need to remove them.

    fredwb - 返信

    Of course you need to remove them you Dingbat! They are the main anchors of the screen hinges, Doh!

    wbcam -

    There are tiny numbers showing the lengths of the screws. 1-2-3-4 where 1 is the shortest.

    The dark red circles are not very easy to see. How about white ones?

    mattikaki - 返信

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Flip the laptop over and open the screen.

      • The bezel and keyboard will be loose, be careful.

    コメントを追加する

    • Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.

      • Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Austin Kidd

メンバー登録日: 2010年04月21日

236 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 29-76, Johann Spring 2010 Cal Poly, Team 29-76, Johann Spring 2010人のメンバー

CPSU-JOHANN-S10S29G76

4 メンバー

30のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 12

過去 30 日: 21

今までの合計 8,925