メインコンテンツにスキップ

この翻訳は、ソースガイドの最新の更新を反映していない可能性があります。 翻訳の更新に協力してください。 または ソースガイドを参照してください

Huawei P8のディスプレイの交換

必要な工具と部品

  1. Huawei P8のディスプレイの交換, ディスプレイ: 手順 1、 2の画像 1 Huawei P8のディスプレイの交換, ディスプレイ: 手順 1、 2の画像 2
    • まず、スマートフォンの電源を切ります。

    • SDカードトレイとSIMカードを取り出します。

  2. この手順は未翻訳です。 翻訳を手伝う。

    Huawei P8のディスプレイの交換: 手順 2、 1の画像 1
    • Remove the two Torx T2 screws located at the bottom next to the micro USB port.

    • If the screen is cracked you might want to use some tape to protect your eyes from glass shreds and get a better grip to open the phone.

  3. Huawei P8のディスプレイの交換: 手順 3、 2の画像 1 Huawei P8のディスプレイの交換: 手順 3、 2の画像 2
    • iSclackか吸盤ハンドルを使って、リアパネルからディスプレイユニットを取り外します。

  4. この手順は未翻訳です。 翻訳を手伝う。

    Huawei P8のディスプレイの交換: 手順 4、 1の画像 1
    • Remove the two Phillips #00 that hold down the two metal clamps covering the front camera, the display and battery flex connectors.

  5. この手順は未翻訳です。 翻訳を手伝う。

    Huawei P8のディスプレイの交換: 手順 5、 3の画像 1 Huawei P8のディスプレイの交換: 手順 5、 3の画像 2 Huawei P8のディスプレイの交換: 手順 5、 3の画像 3
    • Use a tweezer to remove the metal clamp covering the display and the battery flex connector.

    • Unplug the battery flex connector with a Spudger.

    • Remove the metal clamp covering the flex connector of the front camera.

  6. Huawei P8のディスプレイの交換: 手順 6、 3の画像 1 Huawei P8のディスプレイの交換: 手順 6、 3の画像 2 Huawei P8のディスプレイの交換: 手順 6、 3の画像 3
    • ヘッドホンジャックとフロントカメラフレックスコネクタを引き抜きます。

    • フロントカメラを取り外します。

  7. Huawei P8のディスプレイの交換: 手順 7、 3の画像 1 Huawei P8のディスプレイの交換: 手順 7、 3の画像 2 Huawei P8のディスプレイの交換: 手順 7、 3の画像 3
    • Huawei P8のマザーボードを固定している#00プラスネジを4本外します。

    • バイブレーションモーターのフレックスコネクタを引き抜きます。

    • アンテナケーブルの接続を外します。

  8. Huawei P8のディスプレイの交換: 手順 8、 3の画像 1 Huawei P8のディスプレイの交換: 手順 8、 3の画像 2 Huawei P8のディスプレイの交換: 手順 8、 3の画像 3
    • スパッジャーを使って、メインボードからディスプレイフレックスコネクタを引き抜きます。

    • ピンセットを使って、アンテナケーブルの接続を外します。

  9. この手順は未翻訳です。 翻訳を手伝う。

    Huawei P8のディスプレイの交換: 手順 9、 2の画像 1 Huawei P8のディスプレイの交換: 手順 9、 2の画像 2
    • Use a spudger to disconnect the flex cable of the power and volume buttons.

    • Remove the liquid contact indicator that sits on top of the last screw holding down your main board.

  10. Huawei P8のディスプレイの交換: 手順 10、 2の画像 1 Huawei P8のディスプレイの交換: 手順 10、 2の画像 2
    • #00プラスネジを外します。

    • スパッジャーを使って、メインボードを持ち上げて外します。

  11. この手順は未翻訳です。 翻訳を手伝う。

    Huawei P8のディスプレイの交換: 手順 11、 3の画像 1 Huawei P8のディスプレイの交換: 手順 11、 3の画像 2 Huawei P8のディスプレイの交換: 手順 11、 3の画像 3
    • Remove the adhesive tape which is covering the display flex cable.

    • Loosen the adhesive around the mid frame with an iOpener.

    • In particular take care of the adhesive under the top and bottom of the display.

    • When the glue is softened you can use a spudger to get behind the display through the camera bay and get between the frame and the display.

  12. この手順は未翻訳です。 翻訳を手伝う。

    Huawei P8のディスプレイの交換: 手順 12、 3の画像 1 Huawei P8のディスプレイの交換: 手順 12、 3の画像 2 Huawei P8のディスプレイの交換: 手順 12、 3の画像 3
    • Insert an opening pick in the gap where you separated the display from the mid frame.

    • Insert just the tip of the opening pick and slide it along the right side to separate the display from the frame.

  13. Huawei P8のディスプレイの交換: 手順 13、 2の画像 1 Huawei P8のディスプレイの交換: 手順 13、 2の画像 2
    • スマートフォン上部に別の開口ピックを差し込み、ディスプレイ上部に留められた接着剤をほぐします。

  14. この手順は未翻訳です。 翻訳を手伝う。

    Huawei P8のディスプレイの交換: 手順 14、 3の画像 1 Huawei P8のディスプレイの交換: 手順 14、 3の画像 2 Huawei P8のディスプレイの交換: 手順 14、 3の画像 3
    • Insert just the tip of the opening pick and slide it along the left side of the phone to separate the display from the frame.

  15. この手順は未翻訳です。 翻訳を手伝う。

    Huawei P8のディスプレイの交換: 手順 15、 2の画像 1 Huawei P8のディスプレイの交換: 手順 15、 2の画像 2
    • Loosen the adhesive under the bottom part of the display unit with the opening pick.

    • Flip the opening pick a little to separate the display from the mid frame.

    • If you notice that there is still some adhesive which isn't loosened, use the iOpener to loosen it and slide once more along the mid frame with an opening pick.

  16. この手順は未翻訳です。 翻訳を手伝う。

    Huawei P8のディスプレイの交換: 手順 16、 2の画像 1 Huawei P8のディスプレイの交換: 手順 16、 2の画像 2
    • Lift up the display and remove it.

    • The display flex cable should easily go through the recess in the mid frame while removing the display.

終わりに

デバイスを再度組み立てるには、この説明書の逆の順番で組み立ててください。また、必要な場所に接着剤を塗布しなおしてください。

10 の人々がこのガイドを完成させました。

以下の翻訳者の皆さんにお礼を申し上げます:

en jp

55%

これらの翻訳者の方々は世界を修理する私たちのサポートをしてくれています。 あなたも貢献してみませんか?
翻訳を始める ›

作成者

5人の作成者と共同で作成されました。

Dominik Schnabelrauch

メンバー登録日: 11/23/16

201,069 ポイント

682のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Staff

136 メンバー

16,562のガイドは作成済み

2 件のコメント

Is there any difference on screen frame between GRA-L09 and GRA-TL10??? The l09 is the single sim and the TL10 is the dual sim…

Rafail Petridis - 返信

installing a new screen the first time, i was looking at darkness. then, taking it apart again and taking away the protective foil on the back of the screen, it just showed pink/purple colors and started heating up pretty bad around the charging connector. my idea would be a short circuit. any idea what is going wrong and can this still be saved?

Albert Einbein - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 33

今までの合計 17,573