メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

Follow the guide to replace touchscreen glass

  1. Open the SD slot and remove the screw hidden under the sticker.
    • Open the SD slot and remove the screw hidden under the sticker.

  2. Use an opening pick to disengage the clips securing the back cover. Use an opening pick to disengage the clips securing the back cover. Use an opening pick to disengage the clips securing the back cover.
    • Use an opening pick to disengage the clips securing the back cover.

  3. The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

    The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る
  4. Carefully swing up the display assembly, still connected by the touchscreen and display ribbon cables. Disconnect the touchscreen connector. Disconnect the display connector.
    • Carefully swing up the display assembly, still connected by the touchscreen and display ribbon cables.

    • Disconnect the touchscreen connector.

    • Disconnect the display connector.

  5. Remove the 6 screws that secure the 2 metal stripes holding the display. Remove the display. Remove the display.
    • Remove the 6 screws that secure the 2 metal stripes holding the display.

    • Remove the display.

  6. Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame. Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame. Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame.
    • Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame.

  7. Remove any remaining adhesive and piece of glass to allow adhesive and glass panel replacement. Remove any remaining adhesive and piece of glass to allow adhesive and glass panel replacement.
    • Remove any remaining adhesive and piece of glass to allow adhesive and glass panel replacement.

終わりに

To assemble the device, follow these instructions in reverse order.

20 の人々がこのガイドを完成させました。

以下の翻訳者の皆さんにお礼を申し上げます:

100%

これらの翻訳者の方々は世界を修理する私たちのサポートをしてくれています。 あなたも貢献してみませんか?
翻訳を始める ›

Smilzo

メンバー登録日: 2013年11月09日

6,599 ポイント

38のガイドは作成済み

4 件のコメント

Not very clear unlike other guides I have followed….

Tracey Homeward - 返信

Ottimo video,

ti chiedo un consiglio, stavo cambiando il display al mio Huawei T1 A21 quando il connettore sul circuito stampato che collega il touch-screen si è danneggiato.

E’ un connettore particolare 25 pin + 28 e non riesco a trovarlo, sai dirmi come reperirlo?

grazie

Antonio

Antonio Durighello - 返信

Ciao,non saprei dirti dove trovarlo, io farei delle

ricerche online.

Nel caso che lo trovi è comunque un’intervento abbastanza complesso di saldatura ma visto che comunque è rotto tentare non nuoce.

attrezzati bene.

buona fortuna

Smilzo - 返信

Ciao,non saprei dirti dove trovarlo, io farei delle

ricerche online.

Nel caso che lo trovi è comunque un’intervento abbastanza complesso di saldatura ma visto che comunque è rotto tentare non nuoce.

attrezzati bene.

buona fortuna

Smilzo - 返信

コメントを追加

統計データを表示:

過去 24時間: 5

過去 7 日: 34

過去 30 日: 114

今までの合計 16,712