Huawei Honor 6x Back Cover Replacement

はじめに

This guide will be detailing how to separate the screen and back panel in your Huawei Honor 6x. This the first step in most replacement guides for this device.

必要な工具と部品

手順1 SIM Card

Huawei Honor 6x Back Cover Replacement, SIM Card: 手順 1、 1の画像 1

Turn off the device.

翻訳

手順2

Insert the SIM Card Eject Tool into the SIM card tray hole.
Press the eject tool into the hole until the tray clicks open.

翻訳

手順3

Remove the SIM tray from the device using two fingers.
When reinserting the SIM card, be sure it is properly aligned with the SIM tray.

翻訳

手順4

Remove the SIM card from the compartment using two fingers.

翻訳

手順5 Back Cover

Huawei Honor 6x Back Cover Replacement, Back Cover: 手順 5、 2の画像 1

Huawei Honor 6x Back Cover Replacement, Back Cover: 手順 5、 2の画像 2

Insert a plastic opening tool into the Micro USB charging port with the the angled side of the tool facing the screen.
Pry the screen off the back of the phone by pushing down on the opening tool.

翻訳

手順6

Huawei Honor 6x Back Cover Replacement: 手順 6、 3の画像 3

Slide the opening tool or spudger along the bottom of the phone and around the edge.

翻訳

手順7

Once three sides of the screen are detached, pry the phone apart using two hands.
When separating the back panel from the screen, do not pull them too far apart. There is an interconnect that is attached to both sides that could break, or tear, if pulled too far.

翻訳