メインコンテンツにスキップ

はじめに

Replaceing your hdd

パーツ

パーツは指定されていません。

  1. first take out the Phillips screw out of the side panel and then take off the side panel. first take out the Phillips screw out of the side panel and then take off the side panel.
    • first take out the Phillips screw out of the side panel and then take off the side panel.

  2. After you do that then unscrew the two Phillips types screws holding in the HDD deck by the front panel. After you do that then unscrew the two Phillips types screws holding in the HDD deck by the front panel.
    • After you do that then unscrew the two Phillips types screws holding in the HDD deck by the front panel.

  3. Once you've done that then push the button down closer to the logic board right next to it the HDD deck and slide it to the right and pop it out. Once you've done that then push the button down closer to the logic board right next to it the HDD deck and slide it to the right and pop it out. Once you've done that then push the button down closer to the logic board right next to it the HDD deck and slide it to the right and pop it out.
    • Once you've done that then push the button down closer to the logic board right next to it the HDD deck and slide it to the right and pop it out.

  4. Unscrew the four screws holding the HDD in then take that unplug it and then take it out of the deck. Unscrew the four screws holding the HDD in then take that unplug it and then take it out of the deck. Unscrew the four screws holding the HDD in then take that unplug it and then take it out of the deck.
    • Unscrew the four screws holding the HDD in then take that unplug it and then take it out of the deck.

  5. Once you finish taking it then get your new HDD and then put it back in threw it back in the the deck put it back in the whole thing back in you're done hope you liked it  like it thanks bye. thanks please like if you want more of these HDD teardown stuff then if you want me to show you how to modify this same with the floppy disk drive I will glad you guys if you guys thanks please like if you want more of these HDD teardown stuff then if you want me to show you how to modify this same with the floppy disk drive I will glad you guys if you guys
    • Once you finish taking it then get your new HDD and then put it back in threw it back in the the deck put it back in the whole thing back in you're done hope you liked it like it thanks bye.

    • thanks please like if you want more of these HDD teardown stuff then if you want me to show you how to modify this same with the floppy disk drive I will glad you guys if you guys

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

McOfficialPlayYT

メンバー登録日: 2017年02月28日

197 ポイント

1ガイドが承認済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 64