修理を始めるには コミュニティ ストア

How to reset the PIN of a Flipper Zero

はじめに

If you forget your Flipper Zero PIN, the only way to regain access to your device is to perform a factory reset, which will erase all data on the device, including the existing PIN. After the factory reset, you'll be able to set a new PIN and regain access to your device.

The dolphin's level, settings, and information about paired devices will be erased. Data saved on the microSD card will not be lost.

  1. How to reset the PIN of a Flipper Zero, Reset your PIN: 手順 1、 1の画像 1

    • Hold the Up- and Back-buttons for 30 seconds.

    編集

  3. How to reset the PIN of a Flipper Zero, Confirm the Reset: 手順 2、 1の画像 1

    • Confirm the reset procedure by holding the Right-button.

    編集
終わりに

Try to remember your PIN next time!

4 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Sebastian

メンバー登録日: 08/19/18

31,055 ポイント

71のガイドは作成済み

バッジ: 45

+42 個以上のバッジ

4件のガイドコメント

Every time I attempt this, it goes black 20 seconds in the 30 seconds and resets the locked timer.

vmmmp - 返信

You have to wait until the timer ends and it asks for the passcode again. Only THEN can you perform the steps. I just successfully did so after experiencing the same issue as you.

Massimo Cracchiolo - 返信

If i do the same steps my flipper says: Flipper crashed and was rebooted HardFault. What can i do? is there maybe another way ?

Anke Seeland (Ankmaus) - 返信

i got the pin for the flipper : Left Up Right Down = press Insert

Cezar Khaloul - 返信

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 48

過去 30 日: 193

今までの合計 13,982