メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

A backpack often has to take a lot when you are on the road. Due to frequent use, the conector may break and need to be replaced. Here we show you how to replace a broken conector with a new one and how to get your backpack ready for use again!

ツール

ツールは指定されていません。

パーツ

  1. Please note: For better visibility in these instructions, we used an Aeroflex frame detached from the backpack. You don’t have to remove the frame of your backpack first! Please note: For better visibility in these instructions, we used an Aeroflex frame detached from the backpack. You don’t have to remove the frame of your backpack first! Please note: For better visibility in these instructions, we used an Aeroflex frame detached from the backpack. You don’t have to remove the frame of your backpack first!
    • Please note: For better visibility in these instructions, we used an Aeroflex frame detached from the backpack. You don’t have to remove the frame of your backpack first!

  2. First press the frame into one side of the conector. Note: The wire frame must be on top of the conector.
    • First press the frame into one side of the conector. Note: The wire frame must be on top of the conector.

    • Important: It must click!

  3. Then press the wire frame into the other side. Important: It must click! Important: It must click!
    • Then press the wire frame into the other side.

    • Important: It must click!

終わりに

Finished! You did it.

以下の翻訳者の皆さんにお礼を申し上げます:

75%

Daniel Schmidさんは世界中で修理する私たちを助けてくれています! あなたも貢献してみませんか?
翻訳を始める ›

Daniel Schmid

メンバー登録日: 2016年02月22日

297 ポイント

13のガイドは作成済み

チーム

Vaudesport Vaudesport人のメンバー

Community

3 メンバー

91のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 11

今までの合計 39