はじめに

The filter on the Dyson DC14 vacuum needs to be cleaned every six months in order to maintain its peak operating condition.

ツール

工具は必要ありません。

パーツ

The filter is located in the canister of your vacuum.
  • The filter is located in the canister of your vacuum.

コメントを追加する

Open the canister filter compartment.  Push the clip upwards, and open the canister top away from you.
  • Open the canister filter compartment. Push the clip upwards, and open the canister top away from you.

  • Remove the yellow filter housing.

コメントを追加する

  • Remove the blue sponge-filter from the yellow filter housing.

    • The filter and housing must both be completely dry before reinstalling. Do not use your vacuum without filters installed.

  • Clean the blue sponge-filter in cold water until the water runs clear.

コメントを追加する

まとめ

Once the filter is cleaned, set the blue filter sponge and the yellow filter housing aside for at least 24 hours to dry. Do not use your vacuum without a filter, or when the filter is still wet. To reassemble, follow the steps in reverse order.

8 の人々がこのガイドを完成させました。

Donald Percivalle

メンバー登録日: 2012年10月03日

1,162 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 3-22, Amido Fall 2012 Cal Poly, Team 3-22, Amido Fall 2012人のメンバー

CPSU-AMIDO-F12S3G22

4 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 8

過去 7 日: 81

過去 30 日: 467

今までの合計 20,012