メインコンテンツにスキップ

パーツ

パーツは指定されていません。

  1. Turn the DS to the back side.
    • Turn the DS to the back side.

  2. This is the PH00  Screw, Unscrew it.
    • This is the PH00 Screw,

    • Unscrew it.

    • The screw remains captive to the battery cover, you do not need to worry about losing it.

  3. Remove the battery cover. Remove the battery cover.
    • Remove the battery cover.

  4. Wedge the edge on the side of the battery using a spudger. Wedge the edge on the side of the battery using a spudger. Wedge the edge on the side of the battery using a spudger.
    • Wedge the edge on the side of the battery using a spudger.

  5. Take out the battery and leave it for at least 15-30 seconds.
    • Take out the battery and leave it for at least 15-30 seconds.

  6. Reinsert the battery. Make sure the battery matches the + and the - connectors. Make sure the battery matches the + and the - connectors.
    • Reinsert the battery.

    • Make sure the battery matches the + and the - connectors.

  7. Put the cover back on and screw it in. Put the cover back on and screw it in.
    • Put the cover back on and screw it in.

  8. If everything done correctly, You should be at the setup screen, It would look like when you got the ds from the store.
    • If everything done correctly, You should be at the setup screen, It would look like when you got the ds from the store.

    • You can hold A + B + X + Y + R while turning on the system and the ds will boot into a ds cartridge without doing setup, you can boot the Game Pak/GBA Cartridge if you hold A + B + X + Y + L Instead.

終わりに

To reassemble your device, follow these instructions in reverse order.

Artem Ivat

メンバー登録日: 2020年02月05日

937 ポイント

6のガイドは作成済み

チーム

Kid fixers Kid fixers人のメンバー

Community

124 メンバー

103のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 17

過去 30 日: 110

今までの合計 195