メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

パーツ

パーツは指定されていません。

  1. Before starting, be sure to remove the battery from the camera. See Removing the Olympus Stylus 760 Battery Guide for details.
  2. Remove the screw located on the right side of the camera

    • Remove the screw located on the right side of the camera


  3. Remove the two screws from the left side of the camera
    • Remove the two screws from the left side of the camera

  4. Use a small prying device to delicately separate the front casing from the back.
New line.
    • Use a small prying device to delicately separate the front casing from the back.
New line.

    • When separating the 2 cases be cautious of the silver band and buttons that located in the middle of the camera. They will come loose.

  5. 今あるものを使い続けましょう

    オールインワインキットで安く修理して、節約しましょう。

    iPhone 修理キットを見る

    今あるものを使い続けましょう

    オールインワインキットで安く修理して、節約しましょう。

    iPhone 修理キットを見る
  6. Remove the 2 screws on the right side of the camera. Remove the 2 screwson the left side of the camera CAUTION! Circuit ribbon is attached at the top left of the camera be careful when separating the front and back of the camera after removing the 4 screws.
    • Remove the 2 screws on the right side of the camera.

    • Remove the 2 screwson the left side of the camera

    • CAUTION! Circuit ribbon is attached at the top left of the camera be careful when separating the front and back of the camera after removing the 4 screws.

  7. Carefully flip up the clip attaching the ribbon from the rear to the front and pull it out

    • Carefully flip up the clip attaching the ribbon from the rear to the front and pull it out


  8. Carefully separate the front and back of the camera

    • Carefully separate the front and back of the camera


  9. You should be left with 4 large pieces, the outer case, inner lens piece, outer silver band and back case containing the LCD display. 

    • You should be left with 4 large pieces, the outer case, inner lens piece, outer silver band and back case containing the LCD display. 


  10. Using a size 0 Phillips head, remove 3 screws holding the ribbon cable that covers the back of the lens.
    • Using a size 0 Phillips head, remove 3 screws holding the ribbon cable that covers the back of the lens.

    • CAUTION: small loose pieces under the back lens cover

  11. Using tweezers remove tiny square lens cases.  There are 4 small pieces.
    • Using tweezers remove tiny square lens cases. There are 4 small pieces.

    • The pieces are relatively small, so becareful that they do not fall inside of the lens.

  12. Remove the larger black rubber frame. Clean with condensed air.
    • Remove the larger black rubber frame. Clean with condensed air.

終わりに

To reassemble your device, follow these instructions in reverse order.

Derek Guzman

メンバー登録日: 2012年02月10日

17 ポイント

1ガイドが承認済み

チーム

James Madison, Team 3-3, Klein Spring 2012 James Madison, Team 3-3, Klein Spring 2012人のメンバー

JMU-KLEIN-S12S3G3

4 メンバー

7のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 18

今までの合計 1,482