はじめに

This guide contains photos that do not include pictures of the back cover or battery. However, the instructions have been adjusted to reflect this lack of visual aid.

Flip the phone over and take off the back cover
  • Flip the phone over and take off the back cover

  • Note: These images do not contain the back cover or battery of the phone.

コメントを追加する

Use button to remove battery from the phone.
  • Use button to remove battery from the phone.

  • Note: These images do not contain the back cover or battery of the phone.

コメントを追加する

Locate the six (4mm) screws on the back casing of the phone. Unscrew each one using a phillips head #000 screwdriver. Place screws on magnetic mat.
  • Locate the six (4mm) screws on the back casing of the phone.

  • Unscrew each one using a phillips head #000 screwdriver.

  • Place screws on magnetic mat.

コメントを追加する

Starting at the top of the phone, carefully insert plastic opening device into the seam. Carefully slide device along the seam and around the corners of the phone until the back is separated from the front. Note: Some force must be exerted. Be careful when taking off panel. Go slow.
  • Starting at the top of the phone, carefully insert plastic opening device into the seam.

  • Carefully slide device along the seam and around the corners of the phone until the back is separated from the front.

  • Note: Some force must be exerted. Be careful when taking off panel. Go slow.

  • Note: The volume button may separate from the case, this is normal. It is not broken.

コメントを追加する

Locate the connection point of black wire running from the microphone to the motherboard. Carefully disconnect the gold connector from the motherboard using tweezers. Carefully disconnect the gold connector from the motherboard using tweezers.
  • Locate the connection point of black wire running from the microphone to the motherboard.

  • Carefully disconnect the gold connector from the motherboard using tweezers.

コメントを追加する

Locate the red connector at the top of the motherboard. Carefully lift and remove the connector from the motherboard using tweezers. Carefully lift and remove the connector from the motherboard using tweezers.
  • Locate the red connector at the top of the motherboard.

  • Carefully lift and remove the connector from the motherboard using tweezers.

コメントを追加する

Locate the gold connector that connects the screen to the motherboard. Carefully disconnect the connector from the motherboard using tweezers. Carefully disconnect the connector from the motherboard using tweezers.
  • Locate the gold connector that connects the screen to the motherboard.

  • Carefully disconnect the connector from the motherboard using tweezers.

コメントを追加する

Start at the bottom of the motherboard and gently pry it from the back of the cell phone using the plastic opening tool. Lift the motherboard from the cell phone. Lift the motherboard from the cell phone.
  • Start at the bottom of the motherboard and gently pry it from the back of the cell phone using the plastic opening tool.

  • Lift the motherboard from the cell phone.

コメントを追加する

Remove the motherboard from the cell phone.
  • Remove the motherboard from the cell phone.

コメントを追加する

Locate the two black, rubber tabs near the top of the back of the phone. Locate the one black, rubber tab near the base of the phone.
  • Locate the two black, rubber tabs near the top of the back of the phone.

  • Locate the one black, rubber tab near the base of the phone.

コメントを追加する

Using tweezers, pry each of the tabs open. Tuck each tab behind the white notch. By tucking the tabs behind each notch. This allows improves the ease of removing the keypad.
  • Using tweezers, pry each of the tabs open.

  • Tuck each tab behind the white notch.

  • By tucking the tabs behind each notch. This allows improves the ease of removing the keypad.

コメントを追加する

Flip phone over to make the keypad visable. Carefully lift keypad around the edges. Remove keypad from the cell phone.
  • Flip phone over to make the keypad visable.

  • Carefully lift keypad around the edges.

  • Remove keypad from the cell phone.

コメントを追加する

Obtain device cleaner and a cleaning pad.
  • Obtain device cleaner and a cleaning pad.

コメントを追加する

Spray the front of the keypad with device cleaner. Clean front of keypad using cleaning cloth. Clean front of keypad using cleaning cloth.
  • Spray the front of the keypad with device cleaner.

  • Clean front of keypad using cleaning cloth.

コメントを追加する

Flip keypad over. Spray back of keypad with device cleaner. Clean back of keypad with cleaning cloth.
  • Flip keypad over.

  • Spray back of keypad with device cleaner.

  • Clean back of keypad with cleaning cloth.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Yi Ren

メンバー登録日: 2014年03月26日

801 ポイント

16のガイドは作成済み

チーム

Clemson, Team 1-4, Benson Spring 2014 Clemson, Team 1-4, Benson Spring 2014人のメンバー

CLEM-BENSON-S14S1G4

3 メンバー

16のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 94