パーツ

パーツは必要ありません。

Using a Philips screwdriver, remove the two screws on the top of the device, towards the back.
  • Using a Philips screwdriver, remove the two screws on the top of the device, towards the back.

コメントを追加する

Remove the plastic cover by pulling up on the back and away from the faceplate. Remove the plastic cover by pulling up on the back and away from the faceplate.
  • Remove the plastic cover by pulling up on the back and away from the faceplate.

コメントを追加する

Remove the faceplate by unclipping the latches on the bottom of the device. Once it's unlatched, pull the faceplate off. Once it's unlatched, pull the faceplate off.
  • Remove the faceplate by unclipping the latches on the bottom of the device.

  • Once it's unlatched, pull the faceplate off.

コメントを追加する

Now that the device is open, you can check for any blown fuses that may need to be replaced.
  • Now that the device is open, you can check for any blown fuses that may need to be replaced.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Taryn

メンバー登録日: 2011年09月15日

103 ポイント

4のガイドは作成済み

チーム

University of Maine, Team 1-2, Diaz Fall 2011 University of Maine, Team 1-2, Diaz Fall 2011人のメンバー

UMAINE-DIAZ-F11S1G2

2 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 3

今までの合計 751