How to Unclog a Keurig BVMC-KG5

はじめに

You may think your Keurig is broken and done for good, but it may just be clogged. Use this guide to unclog your Keurig coffee brewer in just a few easy steps. All you'll need is your coffee brewer, a paperclip, a bottle of white vinegar and approximately 30 minutes.

必要な工具と部品

手順1 How to Unclog a Keurig BVMC-KG5

How to Unclog a Keurig BVMC-KG5, How to Unclog a Keurig BVMC-KG5: 手順 1、 1の画像 1

Unplug your Keurig.

編集

手順2

Disassemble all of the parts. This includes: water tank, lid, K-cup holder, and both pieces of the tray where the coffee cup sits.
You should not need a screwdriver for this. All of the parts you are disassembling are easily removable by hand.
Wash all of the parts in warm, soapy water. Dry well.

編集

手順3

How to Unclog a Keurig BVMC-KG5: 手順 3、 3の画像 3

Unclog the needles using a slightly bent paperclip.
With the top of the Keuring open, insert the free end of the paperclip into the three small holes surrounding the needle that pierces the K-Cup.
Jiggle the paperclip to loosen any debris.

編集

手順4

Wipe the whole machine down and reassemble all of the previously removed parts.

編集

手順5

Fill the water tank with a half water-half vinegar solution.
Do not use straight vinegar. It can damage the machine's parts due to the acidity.
Run the water-vinegar solution through the machine until you have emptied the tank.
Run clean water through the machine. You may have to repeat this step several times to get all of the water-vinegar solution out of the pipes.