メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

You will learn to do simple threading and sewing in this guide. The tools needed are scissors, an upholstery needle, thick thread, and Fray Check.

  1. Clamp each side of the tear with a safety pin or binder clamp to ensure it stays tight while you stitch. Thread the curved upholstery needle with extra long, double length of thread in the same color as your car seat’s fabric. Tie a knot with the ends of the double thread, opposite to the needle.
    • Clamp each side of the tear with a safety pin or binder clamp to ensure it stays tight while you stitch.

    • Thread the curved upholstery needle with extra long, double length of thread in the same color as your car seat’s fabric. Tie a knot with the ends of the double thread, opposite to the needle.

  2. Slip the needle through the fabric at one end of the tear, and bring it up through the fabric on the other side, about a quarter inch away from the tear.
    • Slip the needle through the fabric at one end of the tear, and bring it up through the fabric on the other side, about a quarter inch away from the tear.

  3. Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ

    Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ
  4. Bring the needle back over the tear and slip it through the fabric to the other side again, continue this until you reach the end of the tear, keeping the stitches a quarter inch apart  .
    • Bring the needle back over the tear and slip it through the fabric to the other side again, continue this until you reach the end of the tear, keeping the stitches a quarter inch apart .

  5. When you reach the end of the tear, stitch over the last stitch 3-5 times, then knot the edge of the thread and trim it as close as possible to the fabric. When you reach the end of the tear, stitch over the last stitch 3-5 times, then knot the edge of the thread and trim it as close as possible to the fabric.
    • When you reach the end of the tear, stitch over the last stitch 3-5 times, then knot the edge of the thread and trim it as close as possible to the fabric.

  6. Paint Fray Check on top of the stitches, focusing on the needle holes and tear itself.
    • Paint Fray Check on top of the stitches, focusing on the needle holes and tear itself.

ゴール

ある他の人がこのガイドを完成しました。

Maxine Okon

メンバー登録日: 2018年02月20日

166 ポイント

1ガイドが承認済み

チーム

University of Delaware, Team S10-G1, McGuire Spring 2018 University of Delaware, Team S10-G1, McGuire Spring 2018人のメンバー

UD-MCGUIRE-S18S10G1

4 メンバー

1のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 20

過去 7 日: 163

過去 30 日: 613

今までの合計 8,280