How to Rethread Skateboard Axle Trucks

はじめに

This guide will demonstrate a technique for repairing damaged threads on skateboard trucks. A stripped axle may seem expensive, as new skate trucks cost about $60, but they can be repaired in under 10 minutes. This method saves time and money.

必要な工具と部品

手順1 How to Rethread Skateboard Axle Trucks

How to Rethread Skateboard Axle Trucks, How to Rethread Skateboard Axle Trucks: 手順 1、 2の画像 1

How to Rethread Skateboard Axle Trucks, How to Rethread Skateboard Axle Trucks: 手順 1、 2の画像 2

Begin by removing the wheel by removing the old nut with a skate tool.
Remember that you have a stripped axle, so you may need extra force to remove the nut.

編集

手順2

Clean off any excess dirt or metal particles with a dry towel.
Your towel should be dry. Cleaning the axle with a wet towel may cause the axle to rust.

編集

手順3

How to Rethread Skateboard Axle Trucks: 手順 3、 3の画像 3

Insert the axle thread tool into the 1/2" socket on the skate tool.
With the thread tool in the socket, insert the axle into the tool and turn your skate tool clockwise throughout the entire axle. Once you feel you have reached the end of the axle, unscrew the tool.

編集

手順4

Inspect your threads for their quality. You should now have even threads with deep grooves. If they appear uneven, you may need to go back and repeat step 4.
Place your wheel back on the axle.

編集

手順5

How to Rethread Skateboard Axle Trucks: 手順 5、 3の画像 3

Discard the old wheel nut and replace it with a new one. Tighten the new nut onto the wheel.
Ensure that your new wheel nut is seated correctly on the threads.
Be careful not to overtighten the new nut to prevent stripping the axle again.